Abrasion Resistant Rubber Sheet

• 

Quick repair method for rubber conveyor belt scratching

When conveyor belt running under high load capacity, whose surface will be torn or longitudinal scratching, if we don’t repair in time, it will be cause big affect to normal production, then affect the economic benefits of enterprises.

After it appears scratching problem, we have to do quick repair, because we have limit halt time. If we choose traditional hot splicing method, though stable and reliable, but it waste time and affect operation time. So whether we have a method to repair it in short time? The answer is positive.

Ramimtech cold repair method choose high quality, abrasion resistant repair materials, applies the bonding technology that semi-cured layer bonding with cold vulcanizing glue sk313,not only easy construct, but also reliable technology, after repair, we can operate it immediately, which saves halt time and enhance the repair efficiency.

Repair methods for conveyor belt repair

First step: sand damaged parts, mark the damaged area, the marked part should be larger than the damaged part, then use the angle grinder L1202 together with K23 tungsten carbide buffing disc to sand the damaged part until the damaged part present a certain radian and no protrusion.

Second step: clean damaged parts, use brush to clean it, then use cleaning solvent to deeply clean it, wait until it dries.

Third step: brush cold vulcanizing adhesive, brush a coat of cold vulcanizing glue SK313 on damaged parts until it totally dry. Then brush cold vulcanizing glue SK313 the second time, meanwhile, repair strip whose semi-cured layer should brush a coat of cold vulcanizing glue SK313, until both of them have little stickiness and begin to bond them.

Forth step: combine repair strip along the damaged parts, avoid air in, after combine, use hand roller to press the repair parts from inner parts, and discharge air.

Notice:
If conveyor belt repair parts appears pierce through or pierce pass phenomenon, we should bond the working part and non-working part with repair strip, and fill the damaged parts with rubber repair agent SK786, then directly bond the repair strip.

Apply Ramimtech cold vulcanizing repairmethods, which suitable for Power Plant, Steel plant, coking plant, cement plant, granary, mine, dock and subway units, the technology is easy operation, no need for big equipment such as vulcanizing machine, which can realize quick repair to damaged parts, after repair, it can reach the work intensity immediately, and start-up and use.

Другие товары поставщика

	what is good brand of pulley lagging glue?	what is good brand of pulley lagging glue? As we known, we need coat one layer rubber sheet on drive drum to improve the running of conveyor system...
	Быстрая холодная вулканизационные клей SK811	Быстрая холодная вулканизационные клей SK811 В recently，RAMIMTECH строители сделали конвейер успешно ремонтировать с помощью быстро холодной вулк...
	Advantages of pulley lagging rubber sheet	Advantages of pulley lagging rubber sheet Before rubber sheet bonding to roller, and the low friction coefficient between roller and belt, which ea...
	Abrasion Resistant Rubber Sheet	Abrasion Resistant Rubber Sheet Ramimtech abrasion resistant rubber sheet is the most excellent rubber sheet in the world, which suitable for high ...
	Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ?	Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ? If we don't roughten repair strip , could it be bo...

Похожие товары

	Aluminum Extrusion 6063 scrap	Продавец: Willies De Scrap Inc	Are you looking for aluminum extrusion 6063 or any other type of scraps and then you are welcome ...
	резиновый валик, резиновый ролик Индия	Продавец: THAKORJI TECHNOMECH	Rubber Roller Silicon Roller PU Rubber Roller Aluminium Roller-
	резиновый ролик Индия	Продавец: THAKORJI TECHNOMECH
	RUBBER ROLLER	Продавец: THAKORJI TECHNOMECH
	" EP/NN/CC high tensile strength Conveyor Belt with heavy load capacity and good elasticity"	Продавец: Haichuan Belting Co.,Ltd	.It uses ployester canvas as carcass, and its structure is the same as that of General-used Conve...