Addition Silicone Putty for Dental Molds

• 

INTRODUCTION:
It is a hydrophilic addition silicone rubber impression material, it contains two components, Part A is platinum catalyst, and Part B is hydrogen containing polysiloxane. This product comprises liquid material and powder material. The main raw material is a silicone oil, silicone resin, alumina, quartz powder and etc.

COMPOSITION:
Base components 350 g;
Catalyst component 350 g;
A white spoon;
A blue spoon

PHYSICAL PROPERTIES:
Appearance:Catalyst Components(White putty),
Base Components(Blue putty);
Mix ratio: 1:1
Pot life: > 60 seconds
Curing time(37C):< 5 min
Hardness(Shore A):60
Permanent deformation (%):<0.2
Dimensional stability (%):<0.25
Copy details(μm): <1.5
Tearing Strength (Mpa):2.0
Temperature stability: 60°C for 1 week
Elongation(%):267

APPLICATION:
It is suitable for the production of precise dental crown, dental fixed bridge, dentures, and articulation registration and takes the mold of ** tissue

USAGE INSTRUCTION:
1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).
2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.
3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.
4. Close the lid immediately after usage, the cover can not be interchanged.

MAIN FEATURE:
1. Good plasticity, small volume incorporation rate, it needs only 3-5min to vulcanize into elastomer at ** temperature, very easy to remove from the mouth after the stamp, and has good chemical stability.
2. High accuracy of mold impression, capability of reproducing the fine structure of the mouth, with good elastic recovery, and good tear strength and dimensional stability, it can provide accurate and reliable morphological basis for clinical dentistry.
3. It has compatibility with almost all model materials, reusable for a period of time and can be sterilized.

PRECAUTIONS:
1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.
2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.
3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.
4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.
5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.

For more information, welcome to contact Lilian:

Phone:

E-mail: lilian(at)

Company: DONGGUAN XINRUN GROUP LIMITED

Factory address:

No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China

Другие товары поставщика

	Silicone Rubber for Ceramics mold making,	FEATURES OF CERAMICS MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resis...
	Silicone rubber for nose bracket/nose pad,High Safety Silicone Rubber,Softy & Transparent Silicone Rubber,Liquid Silicone	PRODUCTION DESCRIPTION:The product is high transparent, 2-part liquid silicone rubber, suitable for making nose bracketKEY FEATURES:1. High...
	Addition Silicone Putty for Dental Molds	INTRODUCTION:It is a hydrophilic addition silicone rubber impression material, it contains two components, Part A is platinum catalyst, and P...
	Silicone rubber for cell phone keypad products	PRODUCTION DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding...
	Pad printing silicone rubber,Silicone Rubber Stampers,Colorful Silicone Rubber,Silicone Rubber With High Quality	INTRODUCTION OF THE SILICONE RUBBER FOR MAKING PRINTING PAD:Pad printing silicone rubber is kinds of RTV-2 liquid silicone rubber with excel...

Похожие товары

	Embossed Silicone Rubber Wristbands/Bracelets Bulk	Продавец: Yppromotion	In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ...
	SILICONE BRACELET	Продавец: Yppromotion	The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona...
	Silicone Square ICE Cube Tray	Продавец: Shenzhen YF Technology Co.,Ltd	The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main...
	Silicone Sports Bottle	Продавец: Shenzhen YF Technology Co.,Ltd	Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I...
	Silicone Sphere Tray	Продавец: Shenzhen YF Technology Co.,Ltd	Environmental friendly material, food grade silicone, used for making various ice cubes, which ca...