Addition Silicone Rubber

• 
• 
• 

GOLOHO heat cured silicone rubberproduces no by-products in the curing process, allowing their use in deep section and complete confinement.

GOLOHO Addition Silicone Rubber has two types, one is one-part type, the other is two-part.

The One-part addition one is heat-cured, thermally conductive adhesives. These adhesives will develop good, primerless adhesion to a variety of common substrates including metals, ceramics, epoxy laminate boards, reactive materials and filled plastics.

For most users, GOLOHO Addition Silicone Rubber should be operational over a temperature range of -45-200℃ for long periods of time. However, at both the low and high-temperature ends of the spectrum, the behavior of the materials and performance in particular applications can become more complex. So, the addition siliconeadditional tests to check its performance before use.

Long-term, reliable protection of sensitive circuits and components is important in many of today’s delicate and demanding electronic applications. Addition-cure silicone is heat cured silicone rubber, which should be cured at 100℃ or above the cure rate is rapidly accelerated with heat. Addition-curing materials contain all the ingredients needed for cure with no by-products from the cure mechanism. Deep-section or confined cures are possible. Cure progress evenly throughout the material. One-part addition-cure silicone rubber should be kept tightly closed at low temperature (below 5℃).

Two-part addition silicone rubber are room temperature or heat accelerated cure. When the two components are thoroughly mixed in a 1 to 1 mix ratio, cure reaction begins. Initially, cure is evidenced by a gradual increase in viscosity, followed by gelation and conversion to a solid, flexible elastomer, which is well suited for the protection of electrical/electronic applications. They cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement. Thus, deep section and complete confinement are preferred. At the same time, no by-products are produced in the cure process. Two-part addition cure silicone rubber should be kept tightly against oxygen and moisture at room temperature.

GOLOHOgrease is a safe thermal conductive silicone grease which is inodorous, non-poisonous, no corrosion to common materials.

Другие товары поставщика

	RTV-1 Silicone Rubber	RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone...
	Addition Silicone Rubber	Addition Silicone Rubber GOLOHOproduces no by-productsrtv greasein the curing process, allowing their use in deep section and complete confinement....
	Modified Alkyd Conformal Coating - L220	FEATURES OF GOLOHO-L220 ·Use at: -40～130℃ ·Excellent insulating performance. ·Good weatherability, temperature tolerance, resi...
	High Performance Silicone Adhesive/Sealant - 3334	FEATURES OF GOLOHO-3334 Convenient: one-part, deoximation, rapid cure at room temperature Neutral, no corrosion to metal, anti-yellowing. Excellent...
	High Performance Silicone Adhesive/Sealant - 3334	FEATURES OF GOLOHO-3334 Convenient: one-part, deoximation, rapid cure at room temperature Neutral, no corrosion to metal, anti-yellowing. Excellent...

Похожие товары

	Silicone Rubber Mold	Продавец: Packson Mold Co.,Ltd	Silicone rubber is a kind of elastic material, which is widely used in industry and family. It ha...
	Embossed Silicone Rubber Wristbands/Bracelets Bulk	Продавец: Yppromotion	In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ...
	SILICONE BRACELET	Продавец: Yppromotion	The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona...
	Silicone Square ICE Cube Tray	Продавец: Shenzhen YF Technology Co.,Ltd	The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main...
	Silicone Sports Bottle	Продавец: Shenzhen YF Technology Co.,Ltd	Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I...