Four-door Two-cap Durable Test Stand
Real door electric glass lifter and manual lift is used to finish the performance and durability test. White car body and real car (passenger car) are installed the test bench. The installation is scientific and convenient. You can choose to drive directly to or mounted to the installation platform. The detection mechanism can be installed in the real car (passenger car) to finish performance and durability test.
Application
The four-door double-cover durability test bed is mainly used for door hinges, limiters, door locks, fuel tank covers, door seals for door, front cover and rear cover for all types of cars, SUV and MPV, passenger cars and other models at room temperature the overall performance of the assembly and durability test.
Through the test, check the functional and quality of car side doors and front and rear cover and fasteners and other components
Features
◆Each drive system is completely independent. The drive system can achieve a different combination to meet different test needs.
◆The instrument can be integrated into a four-door test on a device. You can also test the multi-car, for example, two cars can be carried out at the same time durable test. A car is used to do four side door durability test. Another car is used to do the durability test before and after the cover; Because the test bench has seven test modules, about seven vehicles can be carried out at the same time durable test.
◆When the test does not require all the modules at the same time action, you can remove the unnecessary modules, saving test space and ensure the cleanliness of the test site.
◆Because the modules are completely independent, easy to adjust, reducing the operational strength of the pilot, to facilitate the test.
Другие товары поставщика
|
|
Fiber crimp elastometer |
Product Introduction:
YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber.
Crimp elasticity, crimp recovery rate index... |
|
|
Face Mask Tensile meter |
Introduction:
The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
|
|
Rubber Mooney Viscosity Tester |
Test principle:
The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa... |
|
|
Floor Caster Wear Tester |
Meet the standard:
GB/T 11982.2,
GB/T 4085,
BS/EN 425,
ISO 4918-2009
ASTM D6962
BS EN 425-2002
BS EN 985-2001
ISO 10581-2011
ANSI-NALFA-LF... |
|
|
Falling Sand Abrasion Tester |
Applicable Standard
JG/T 133-2000
ASTM D968-83
ASTMD333
ASTMD1395
ASTMD2205
Main Purposes
It is mainly used to test the abrasion - resistanc... |
Все товары поставщика
Похожие товары
