GCYFXTY Air Blown Fiber Optic Cable

GCYFXTY air blown fiber optic cableis a loose tube made of a high modulus material with a 250µm single-mode or multi-mode fiber.

The tube is filled with a non-toxic and harmless waterproof compound, and the loose tube is twisted with a non-metallic reinforcing element. Then extruded black or colored high-density polyethylene (HDPE) sheath into cable.

As a professional fiber optic products supplier, we have different types of optical fibre for our customers.

Details of GCYFXTY Air Blown Fiber Optic Cable

Blown fiber opticis featured with small diameter, lightweight, low friction, excellent softness, and high fiber density, which can improve the laying efficiency and save construction cost.

SN	Item	Unit	Value
1		count	2/4/6/8/12
2	Typical air blowing distance	m	≥1000
3	Storage temperature	℃	-20~+70
4	Outer sheath thickness (nominal)	mm
5	Cable diameter (±5%)	mm
6	Cable weight (±10%)	kg/km
7	Short term tension	N
8	Short term crush	N/100mm	150/45
9	Micro ducts (OD/ID)	mm	5/3.5

Note: Mechanical sizes are nominal values. G means the weight of the cable.

Characteristics of GCYFXTY Air Blown ADSSFiber Optic Cable

Optical fiber characteristics (G.657A2 FIBER)

Mode field diameter (1310nm):
Mode field diameter (1550nm):
Cut off wavelength of cabled fiber (lcc):	£1260nm
Attenuation at 1310nm:	£0.36dB/km
Attenuation at 1550nm:	£0.22dB/km
Bending loss at 1550nm (10 turns, 15mm radius):	£0.03dB
Bending loss at 1625nm (10 turns, 15mm radius):	£0.1dB
Bending loss at 1550nm (1 turns, 10mm radius):	£0.1dB
Bending loss at 1625nm (1 turns, 10mm radius):	£0.2dB
Dispersion in the range 1288 to 1339nm:	£3.5ps/ (nm•km)
Dispersion at 1550nm:	£18ps/ (nm•km)
Dispersion slope at zero dispersion wavelength:	£0.092ps/(nm^2•km)

Specification of GCYFXTY Air Blown Fiber Optic Cable

Static: 10*cable diameter

Dynamic: 20*cable diameter

Operation: -5℃~ +60℃

Installation: -5℃~ +50℃

Storage/transportation: -20℃~ +70℃

Item	Test Method	Acceptance Condition
Tensile Strength IEC 60794-1-2-E1	Load: Short term tension	- Fiber strain £0.25%
	Length of cable: about 50m	- No fiber break and no sheath damage.
	Load time: 1min
Crush Test	Load: Short term crush	- Loss change £0.1dB@1550nm
IEC 60794-1-2-E3	Load time: 1min	- No fiber break and no sheath damage.
Impact Test	Points of impact: 3	- Loss change £0.1dB@1550nm
IEC 60794-1-2-E4	Times of per point: 1	- No fiber break and no sheath damage.
	Impact energy: 1J
Repeated Bending IEC 60794-1-2-E6	Bending radius: 20 x OD or the minimum mandrel radius 75 mm	- Loss change £0.1dB@1550nm
		- No fiber break and no sheath damage.
Torsion	Length: 1m	- Loss change £0.1dB@1550nm
IEC 60794-1-2-E7	Twist angle: ±90°	- No fiber break and no sheath damage.
Cable bend	Diameter of mandrel:20 x OD	- Loss change £0.1dB@1550nm
IEC 60794-1-2-E11	Number of turns:4	- No fiber break and no sheath damage.
	Number of cycles:3
Temperature Cycling IEC 60794-1-2-F1	Temperature: -10oC~+60oC	- Loss change £0.1dB/km@1550nm
	Time of each step: 12h	- No fiber break and no sheath damage.
	Number of cycle: 2

Drawing of GCYFXTY Air Blown Fiber Optic Cable

Packing and Comments of GCYFXTY Air Blown Fiber Optic Cable

Packing material: Non-returnable wooden drum.

Both ends of cable are securely fastened to drum and sealed with a shrinkable cap to prevent ingress of moisture.

Cable printing: The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

- Cable type and number of optical fiber

- Manufacturer name

- Month and Year of Manufacture

- Cable length

Drum marking: Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with following:

- Manufacture name and logo

- Cable length

- Cable type and number of fibers

- Roll way

- Gross and net weight

Video of GCYFXTY Air Blown Fiber Optic Cable

If you want to know more about blown fiber optic technologyand blown fiber optic installation, please visit our website.

Другие товары поставщика

	Outdoor Fiber Optic Cable	Outdoor fiber opticalcableis a communication line applied in an outdoor environment. TUOLIMA can customize any model of outdoor fiber optic cable a...
	Fiber Optic Distribution Box	Fiber distribution boxis used as a termination point for feeder cable to connect with drop cable in FTTX communication network. The fiber splitt...
	Fiber Optic Cleaning Pen	Dirty connectors cause a major percentage of fiber optic network failures; the simplest prevention is to clean the connectors. TUOLIMAFiber Optic C...
	TGJS-303A Splitter Type Fiber Optic Splice Closure	As a fiber optic products supplierin the industry, TUOLIMAfocuses on brand customization, multi-selective product logo printing, high-end and indep...
	PA-1500 Tension Cable Clamp	For tension of LV ABC cables in an insulated messenger wire system (IMWS). Suitable for every climatic conditions. This tension wire clampis eas...

Все товары поставщика

Похожие товары

	Indoor Wall Mounted Mini Fiber Optic FTTH Terminal Box 4 Ports White	Продавец: Shenzhen UnitekFiber Solution Limited	UnitekFiber supplies 4 ports wall mounted opticsFaceplate & FTTH Terminal Box. This fiber opt...
	Introduction of Bulk Fiber Optic Cables Assembly	Продавец: Shenzhen UnitekFiber Solution Limited	Bulk fiber optic cable for saleassemblies are convenient and economical fiber cable devices to ru...
	Description of breakout fiber optic cable	Продавец: Shenzhen UnitekFiber Solution Limited	optical breakout cablealso can be called as distribution fiber optical cable is designed for Indo...
	AOC Active Optical Cable 40G QSFP to-4 x 10G SFP+ Breakout AOC Cable 5M	Продавец: Shenzhen UnitekFiber Solution Limited	Active optical cable, as a main transmission medium for high-performance computers and data cente...
	Introduction of Anti-rodent Fiber Optic Cable	Продавец: Shenzhen UnitekFiber Solution Limited	The rodent proof fiber optic cableis suitable for use in many places with lots of rats. The anti ...