Cloth Buttonhole-Resistant Fabric Evaporation Performance System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Product Overview
The Textile Water Evaporation Rate Tester is a precision instrument designed to evaluate the moisture evaporation and quick-drying performance of textiles. By measuring the rate of water evaporation from fabric samples under controlled conditions, it provides quantitative, repeatable, and objective data on textile moisture management properties. This instrument is widely used in textile R&D, quality control, and performance verification labs.
Standards
The design and operation comply with both national and international standards, including:
(1) AATCC Test Method 201 – Drying rate of fabrics
(2) AATCC Test Method 199 – Water vapor transmission of textiles
(3) AATCC Test Method 200 – Moisture management testing
(4) ASTM E96 – Standard test methods for water vapor transmission of materials
(5) ISO 11092 – Measurement of thermal and water-vapor resistance of textiles
(6) GB/T 23457 – Testing of textile drying and moisture evaporation performance
Product Features
(1) High-precision measurement: uses imported balances with 0.001g accuracy for reliable, repeatable results.
(2) Multi-station testing: 6 independent workstations with individually controlled motors for high throughput.
(3) Computer-controlled operation: software-based upper computer control for experiment setup, monitoring, and data acquisition.
(4) Safety design: institutional self-locking prevents accidents during sudden power failure.
(5) Optimized structure: precise sample positioning and smooth motor operation with minimal noise.
(6) Flexible measurement: adjustable weighing interval and automatic test termination based on evaporation rate stability.
(7) Data analysis: real-time curve generation and automatic evaporation rate calculation for accurate reporting.
Technical Parameters
| Parameter | Specification |
|---|---|
| Sensor Accuracy | 0.001 g |
| Sample Weight | < 100 g |
| Sample Weighing Interval | ≥1 min (adjustable) |
| Applicable Sample Size | 100 mm × 100 mm |
| Number of Workstations | 6 (independently controlled) |
| Control Mode | Computer upper software control |
| Power Supply & Power | AC 220V ±10%, 50Hz, 200W |
| Dimensions (L×W×H) | 500 × 450 × 665 mm |
| Instrument Weight | 40 kg |
| Test Termination Condition | Evaporation rate change <1% |
Test Procedures / Maintenance
(1) Prepare textile samples of 100×100 mm and place them in the sample holders.
(2) Set the weighing interval, number of workstations, and test conditions via the software.
(3) Start the test: the system monitors and records the evaporation weight in real time.
(4) Observe the generated drying curves and calculate the evaporation rate.
(5) Test terminates automatically when the evaporation rate change is <1%.
(6) After testing, clean sample holders, balance pan, and surrounding areas to prevent residue accumulation.
(7) Periodically check and calibrate balance accuracy, motor performance, and software settings for consistent results.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Battery Diaphragm Gas Permeability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Diaphragm Gas Permeability Tester is a precision instrument designed to evaluat... |
 |
Walk-in High-Temperature Aging Chamber,walk in stability chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Walk-in High-Temperature Aging Chambers are typically assembled on-site using... |
 |
FPC Folding Life Tester for Electronics Laboratory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Flex durability testing of FPC (Flexible Printed Circuits) u... |
 |
Disc and pin wear testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Friction and wear testing of metal and non-metallic material surfaces. Evalua... |
 |
Suture Needle Sharpness Intensity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Assessing Penetration Performance: By simulating the process of suture needle... |
