Cloth Buttonhole-Resistant Fabric Evaporation Performance System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Product Overview
The Textile Water Evaporation Rate Tester is a precision instrument designed to evaluate the moisture evaporation and quick-drying performance of textiles. By measuring the rate of water evaporation from fabric samples under controlled conditions, it provides quantitative, repeatable, and objective data on textile moisture management properties. This instrument is widely used in textile R&D, quality control, and performance verification labs.
Standards
The design and operation comply with both national and international standards, including:
(1) AATCC Test Method 201 – Drying rate of fabrics
(2) AATCC Test Method 199 – Water vapor transmission of textiles
(3) AATCC Test Method 200 – Moisture management testing
(4) ASTM E96 – Standard test methods for water vapor transmission of materials
(5) ISO 11092 – Measurement of thermal and water-vapor resistance of textiles
(6) GB/T 23457 – Testing of textile drying and moisture evaporation performance
Product Features
(1) High-precision measurement: uses imported balances with 0.001g accuracy for reliable, repeatable results.
(2) Multi-station testing: 6 independent workstations with individually controlled motors for high throughput.
(3) Computer-controlled operation: software-based upper computer control for experiment setup, monitoring, and data acquisition.
(4) Safety design: institutional self-locking prevents accidents during sudden power failure.
(5) Optimized structure: precise sample positioning and smooth motor operation with minimal noise.
(6) Flexible measurement: adjustable weighing interval and automatic test termination based on evaporation rate stability.
(7) Data analysis: real-time curve generation and automatic evaporation rate calculation for accurate reporting.
Technical Parameters
| Parameter | Specification |
|---|---|
| Sensor Accuracy | 0.001 g |
| Sample Weight | < 100 g |
| Sample Weighing Interval | ≥1 min (adjustable) |
| Applicable Sample Size | 100 mm × 100 mm |
| Number of Workstations | 6 (independently controlled) |
| Control Mode | Computer upper software control |
| Power Supply & Power | AC 220V ±10%, 50Hz, 200W |
| Dimensions (L×W×H) | 500 × 450 × 665 mm |
| Instrument Weight | 40 kg |
| Test Termination Condition | Evaporation rate change <1% |
Test Procedures / Maintenance
(1) Prepare textile samples of 100×100 mm and place them in the sample holders.
(2) Set the weighing interval, number of workstations, and test conditions via the software.
(3) Start the test: the system monitors and records the evaporation weight in real time.
(4) Observe the generated drying curves and calculate the evaporation rate.
(5) Test terminates automatically when the evaporation rate change is <1%.
(6) After testing, clean sample holders, balance pan, and surrounding areas to prevent residue accumulation.
(7) Periodically check and calibrate balance accuracy, motor performance, and software settings for consistent results.
在线联系供应商
Other supplier products
 |
Foam Repeated Compression Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Foam repeated compression testing machine will accurately measure the thickness of the test... |
 |
Safety Helmet Roll-off Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The safety helmet retention test equipment is a device used to evaluate the stability of a ... |
 |
Fully Automatic Continuous Flow Reaction Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards SN/T 3078.1. NY/T 3784. GB 51283 Product Features： 1. Using the coefficient ca... |
 |
Fire retardant coating test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Fire retardant coating test machineis composed of two parts: the main control box and the b... |
 |
KES-SESRU surface roughness/friction tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by art... |
Same products
 |
Composite Flame Retardant For Adhesive XS-FR- 308/XS-FR-708 | 卖方: Zhejiang Xusen Flame Retardants Incorporated Company | XS-FR-308/XS-FR-708 are nitrogen phosphorus composite, low smoke intumescentflame retardants, whi... |
 |
Nylon High Strength Sewing Thread | 卖方: Hangzhou Fantex Textile Co., Ltd | Nylon high strength sewing thread(nylon thread) selects high toughness nylon filament as raw mate... |
 |
HMPE Yarn | 卖方: Hangzhou Fantex Textile Co., Ltd | Fantex high strength polyethylene yarn is a premium HMPE Yarn(High Modulus Polyethylene Yarn), re... |
 |
Nylon Fishing Twine | 卖方: Hangzhou Fantex Textile Co., Ltd | Our nylon fishing twineis made from high tenacity nylon twine , ensuring a long-lasting and relia... |
 |
High Tenacity Polyester Bonded Thread | 卖方: Hangzhou Fantex Textile Co., Ltd | High Tenacity Polyester Bonded Threadis a kind of industrial filament sewing thread made of high ... |
