Cloth Buttonhole-Resistant Fabric Evaporation Performance System

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Product Overview

The Textile Water Evaporation Rate Tester is a precision instrument designed to evaluate the moisture evaporation and quick-drying performance of textiles. By measuring the rate of water evaporation from fabric samples under controlled conditions, it provides quantitative, repeatable, and objective data on textile moisture management properties. This instrument is widely used in textile R&D, quality control, and performance verification labs.

Standards

The design and operation comply with both national and international standards, including:

(1) AATCC Test Method 201 – Drying rate of fabrics

(2) AATCC Test Method 199 – Water vapor transmission of textiles

(3) AATCC Test Method 200 – Moisture management testing

(4) ASTM E96 – Standard test methods for water vapor transmission of materials

(5) ISO 11092 – Measurement of thermal and water-vapor resistance of textiles

(6) GB/T 23457 – Testing of textile drying and moisture evaporation performance

Product Features

(1) High-precision measurement: uses imported balances with 0.001g accuracy for reliable, repeatable results.

(2) Multi-station testing: 6 independent workstations with individually controlled motors for high throughput.

(3) Computer-controlled operation: software-based upper computer control for experiment setup, monitoring, and data acquisition.

(4) Safety design: institutional self-locking prevents accidents during sudden power failure.

(5) Optimized structure: precise sample positioning and smooth motor operation with minimal noise.

(6) Flexible measurement: adjustable weighing interval and automatic test termination based on evaporation rate stability.

(7) Data analysis: real-time curve generation and automatic evaporation rate calculation for accurate reporting.

Technical Parameters

Parameter	Specification
Sensor Accuracy	0.001 g
Sample Weight	< 100 g
Sample Weighing Interval	≥1 min (adjustable)
Applicable Sample Size	100 mm × 100 mm
Number of Workstations	6 (independently controlled)
Control Mode	Computer upper software control
Power Supply & Power	AC 220V ±10%, 50Hz, 200W
Dimensions (L×W×H)	500 × 450 × 665 mm
Instrument Weight	40 kg
Test Termination Condition	Evaporation rate change <1%

Test Procedures / Maintenance

(1) Prepare textile samples of 100×100 mm and place them in the sample holders.

(2) Set the weighing interval, number of workstations, and test conditions via the software.

(3) Start the test: the system monitors and records the evaporation weight in real time.

(4) Observe the generated drying curves and calculate the evaporation rate.

(5) Test terminates automatically when the evaporation rate change is <1%.

(6) After testing, clean sample holders, balance pan, and surrounding areas to prevent residue accumulation.

(7) Periodically check and calibrate balance accuracy, motor performance, and software settings for consistent results.

Other supplier products

	Hot Tack Tester / Heat Seal Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The hot - tack tensile tester is an instrument specifically designed to test ...
	Sauce Packet Pressure Testing Instrument	Whats/App: +86 156 1874 6768 Web: standard-groups.com The pressure resistance tester for sauce packets is a device specifically designed to test ...
	Diesel Water Ash Sulfur Testing Device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 16332:2018：Diesel engines — Fuel filters — Method for evaluating...
	Blood collection tube vacuum tester machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The design and manufacture of the Vacuum Blood Collection Tube Aspiration Volume...
	Rapid Thermal Conductivity Tester for Geotechnical Materials (Transient Plane Heat Source Method) ISO 22007	Whats/App: +86 156 1874 6768 Web: standard-groups.com Rapid Thermal Conductivity Tester for Geotechnical Materials (Transient Plane Heat Source M...

All supplier products

Same products

	PP Monofilament Yarn	Seller: Dongguan BOSIDI New Materials Co Ltd	Polypropylene monofilamentis a type of monofilament product made from polypropylene (PP), a therm...
	TPEE Monofilament Yarn	Seller: Dongguan BOSIDI New Materials Co Ltd	TPEE Monofilament Yarn(Thermoplastic Polyester Elastomer) is an advanced engineering material des...
	Two-component Foldable Monofilament Yarn Manufacturers	Seller: Dongguan BOSIDI New Materials Co Ltd	Product physical properties: Melting degree: 220°C Specification: 0.11~1.5 (mm) Fracture s...
	Wear-resistant &fold-resistant monofilament yarns	Seller: Dongguan BOSIDI New Materials Co Ltd	Wear-resistant and fold-resistant monofilament yarnsare engineered for demanding applications whe...
	Black Transparent Nylon Thread String Nylon Monofilament sewing Thread	Seller: Dongguan BOSIDI New Materials Co Ltd	This clear monofilament threadis your go-to solution for all your sewing projects – from de...