Textile far-infrared radiation temperature rise test instrument
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
Textile Far Infrared Radiation Temperature Rise Tester is used for various textiles including fibers, yarns, fabrics, nonwovens, and their products. It employs temperature rise testing to determine the far-infrared performance of textiles.
Standards
GB/T 30127-2013 ：“Textiles - Testing and Evaluation of Far-Infrared Properties” Clause 4.2 Test Method for Far-Infrared Radiation Temperature Rise
T/CAS 115.5-2021:Health Care Textiles — Part 5: Far Infrared
Features
1. Features an industrial-grade color touchscreen display and control system with an intuitive human-machine interface that is simple to use and enhances operational convenience.
2. Utilizes an automatic measurement mode, enabling one-touch initiation to automatically complete the testing process.
3. Incorporates high-precision sensors capable of rapid response and accurate measurement of current temperature.
Parameters
|
Parameter Item |
Parameter Value |
|
Specimen Holder |
500mm distance from radiation source to specimen surface |
|
Radiation Source |
Main wavelength 5μm~14μm, radiation power 150W |
|
Specimen Irradiation Area |
φ60~φ80mm |
|
Temperature Range & Accuracy |
15℃~50℃, ±0.1℃ precision, ≤1s response time |
|
Specimen Types |
|
Test Procedures
I. Power-Up and Setup
1. Connect Power:
Turn on the instrument's power switch to enter the setup interface.
2. Parameter Settings:
Irradiation Power: Typically set to 150W.
Test Duration: Generally 30 seconds.
Test Cycles: Set according to standard requirements, e.g., 5 cycles.
II. Sample Installation
1. Fixture Selection:
Thin Samples: Install thin-sample fixture and tighten the nut.
Thick Samples: Place directly onto the disk, aligning with the center.
2. Sample Placement:
Ensure the test line is positioned at the center point.
Place the sample face up and secure the edges with a ruler.
III. Test Procedure
1. Preheat: Click “Turn on Light” to preheat the instrument.
2. Start Test:
Click the test interface; timing starts for 30 seconds.
Observe temperature rise value, initial temperature, and final temperature.
Automatic Result Display: Data appears automatically upon test completion.
IV. Data Processing
Data Retrieval: Click Details to view test results.
Report Printing: Click Print to generate the test report.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
ASTM E84 Steiner Tunnel Test Furnace | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The ASTM E84 Building Materials Flame Spread Test Apparatus is designed to ev... |
 |
Safety Helmets Against Molten Metal Splashing Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (... |
 |
Gas Hazardous Characteristics Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This tester is used to test the flammable concentration range of gase... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The safety helmet high-temperature pre-treatment chamber is manufactured according to the G... |
 |
Super Xenon Weather Meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com SX75 accelerates the degradation of materials by exposing them to simulated outdoor and ind... |
