Grinding Head G - Round Shape Shape (RO)

KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels and shapes. To select the correct installation point, consideration must be given to the material, main application area and specific operational requirements. We will explain to you the appropriate materials for the different types (abrasives and binders) and the task at hand.

Features of Grinding Head G - Round Shape Shape (RO)

Designed to meet individual grinding tool application needs, these products come in a broad range of grain types, grit sizes, hardness grades and shapes.

The mounted points are manufactured on modern production lines to high standards of dimensional accuracy and stability, consistent quality and close tolerances.

To select the correct a11 mounted point, the material, main fields of application and specific operating requirements have to be taken into consideration.

Grinding Head G - Round Shape Shape (RO) Applicable Industries

Applications

Surface: Edges and difficult reached angels, Deburring, Grinding, Welding removing, Finishing, Prepare for grouting, Roughening

Material Apply: Steel, Cast steel, Stainless steel, Non-ferrous metals, Cast iron, Plastics, Rubber, Woo

Matching Tool Drives:

Flexible shaft drive

Straight grinder

Safety Instructions of Grinding Head G - Round Shape Shape (RO)

How To Grinding Head G - Round Shape Shape (RO)

Instructions:

Please try to choose operation indoors environment and wear protective guards and goggles.

Never to exceed the recommanded maximum permitted rotational speed for safety reasons.

In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.

Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

As a reliable abrasives factory, we will do our best to meet all the needs of customers.

Другие товары поставщика

	Grinding Head G - Lengthen Peach Tip Shape (LP)	KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are des...
	Felt Disc Flat Type	felt disc flat type Flat type steel wool polish chromeis specially designed for mirror finishing & polishing requirements. It's different l...
	Felt Polishing Wheel With Shank 1-3/16inch	Felt Polishing MopsWith Shank 1-3/16 inch are used for pre-polishing and high-gloss polishing on small to medium-sized components. The hard felt wh...
	Felt Polishing Wheels	KEYING wool hard felt polishingbuffing wheel combined with polishing paste is used for pre-polishing and high-gloss polishing to work accurately in...
	Flap Wheel (Arbor Hole)	This non-standard custom abrasive flap wheel for mandrel assembly is a Straight Hole Type, common mounted flap wheels specifications have 8mm hole ...

Все товары поставщика

Похожие товары

	3 Ton Rail Lifting Carrying Tongs	Продавец: 834406	铁路奇格尔灯 可广泛应用于铁路、船舶等交通运输行业和一些特殊行业，如信号指示、安全警示和工作照明。
	Grinding Head X 1/4inch	Продавец: Keying Abrasives	KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
	Grinding Head X 1-3/16inch	Продавец: Keying Abrasives	KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
	Grinding Head X	Продавец: Keying Abrasives	KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
	Grinding Head G - T Shape (T)	Продавец: Keying Abrasives	KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc...