Grinding Head G - Round Shape Shape (RO)
KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels and shapes. To select the correct installation point, consideration must be given to the material, main application area and specific operational requirements. We will explain to you the appropriate materials for the different types (abrasives and binders) and the task at hand.
Features of Grinding Head G - Round Shape Shape (RO)
Designed to meet individual grinding tool application needs, these products come in a broad range of grain types, grit sizes, hardness grades and shapes.
The mounted points are manufactured on modern production lines to high standards of dimensional accuracy and stability, consistent quality and close tolerances.
To select the correct a11 mounted point, the material, main fields of application and specific operating requirements have to be taken into consideration.
Grinding Head G - Round Shape Shape (RO) Applicable Industries
Applications
Surface: Edges and difficult reached angels, Deburring, Grinding, Welding removing, Finishing, Prepare for grouting, Roughening
Material Apply: Steel, Cast steel, Stainless steel, Non-ferrous metals, Cast iron, Plastics, Rubber, Woo
Matching Tool Drives:
Flexible shaft drive
Straight grinder
Safety Instructions of Grinding Head G - Round Shape Shape (RO)
How To Grinding Head G - Round Shape Shape (RO)
Instructions:
Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
Safety Warning:
The clamping lenght between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
As a reliable abrasives factory, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO) | Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable a... |
 |
Felt Polishing Wheels (W) | The steel wool polishing wheelcombined with polishing paste is used for pre-polishing and high-gloss polishing to work accurately in hard-to-reach ... |
 |
FINE POLISHING AND FINISHING | Fine polishingis the process of generating a reflective surface. Typically, polishes are created by using micron or sub-micron abrasive particles... |
 |
Aluminum Oxide Spiral Band (AO) | Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable a... |
 |
Cartridge Rolls With Shank 25/32inch | Table of Cartridge Rolls with Shank 25/32inch Cartridge Rolls with Shank 25/32inch Specification: Diameter: 25/32 inch=20mm Raw Materials: A... |
Same products
 |
railway signal torch tricolor railway signal light | Seller: 834406 | 铁路奇格尔灯 可广泛应用于铁路、船舶等交通运输行业和一些特殊行业，如信号指示、安全警示和工作照明。 |
 |
Grinding Head X 1/4inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X 1-3/16inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head G - T Shape (T) | Seller: Keying Abrasives | KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc... |
