ZG-P-8086/ZG-I-9823
Super high-hardness and super low-density PU Resin for shoe sole
Characteristic: Super-high hardness, super-low density.
Application: Applicable to the production of shoe soles for both men and women
Typical properties of PU Resin
|
Name of products |
Appearance |
Viscosity（Pa·s/50℃） |
Density（g/cm3/40℃） |
Package（kg） |
|
ZG-P-8086 |
White or pale yellow, liquid, no foreign material |
18 |
||
|
ZG-I-9823 |
Transparent liquid, no foreign material |
20 |
Reference shipments ratio: A/B=28/25(barrel)
Catalysts and auxiliary agents
ZG-P-8086/ZG-AC-2/water =18kg/230g/70-120g
Note: corresponding adjustment should be made to the addition of auxiliary agent at different areas, different environment and different production conditions.
Molding conditions & physical properties:
|
Reactivity |
Technical index |
Test item |
Reference physical properties |
|
Reference ratioP+C/I |
100/98-102 |
Molded density of sole（g/cm3） |
|
|
Using temperature（℃） |
material: 45-50; B material: 38-42 |
Hardness (type A) |
75~80 |
|
Cream time（s） |
6~9 |
Tensile strength（MPa） |
— |
|
Rise time（s） |
30~45 |
Elongation（％） |
— |
|
Metal mold temperature（℃） |
55~65 |
NBS abrasion resistance（％） |
≥10% |
|
Demould time（min） |
Free foam density（g/cm3） |
||
|
Folding endurance (room temperature)(40,000 gap length mm) |
— |
Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added.
Free foam density will vary with the seasons (temperature, humidity).
Stripping time will be extended with the increase of the thickness of moldings.
Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times
Data listed above is just for reference. The specific data is subjected to the practical operation. If other physical properties are required, please contact us.
More information can view .
Send product request
Other supplier products
 |
ZG-P-5080/ZG-I-5002 | ZG-P-5080/ZG-I-5002,High Density High Hardness Sole Pu,Low-Hardness Shoe Sole PU Resin High Density High Hardness Sole Pu Low-Hardness Shoe Sole PU... |
 |
Sandals Shoes Sole PU Resin | Medium and high-density PU Resin for shoe sole with the upper Characteristic: Medium and low hardness, medium density and feel good Applica... |
 |
China Medium Hardness Sole PU Resin | ZG-P-5005/ZG-I-5320 Medium and high-density PU Resin for shoe sole with the upper Characteristic: Medium and low hardness, medium and high densit... |
|
|
ZG-P-5050/ZG-I-5002 | ZG-P-5050/ZG-I-5002,Low-Hardness Shoe Sole PU Resin,Sandals Shoes Sole PU Resin Low-Hardness Shoe Sole PU Resin Sandals Shoes Sole PU Resin Medium ... |
 |
ZG-P-5080/ZG-I-5220 | ZG-P-5080/ZG-I-5220 High-hardness and medium and high-density PU Resin for shoe sole of woman high-heeled shoes and gents business shoes Characte... |
