RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY620 adopts surface mount installation form. Small size is a major feature of JMY620. JMY620 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY620 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8.
Qualifications:
- PCD: NXP MF RC522, NXP MF RC523
- Working frequency: 13.56MHz
- RF standard: ISO14443A, ISO14443B
- Operating distance: 100mm(depending on card and antenna design)
- Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- Auto detecting card: Supported, default OFF; Can be set
- Interface: IIC, UART(selected by SPS pin, recommend to use IIC)
- Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
- Max.command length: 511 Bytes
- Interface level: 3.3V (TTL level; 5V tolerance)
- Power supply: DC 3.3V + 5V(±0.5V)
- Power consumption: Working mode:80mA; Idle:100uA
- Dimension: 22mm×35mm
- Package: Surface Mount
- Weight: about 10g
- Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- ISP: Supported
- RoHS: Compliant
Send product request
Other supplier products
 |
Surface Mount Package HF RFID Module JMY622 | JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards.... |
 |
Low cost hf 13.56mhz rfid reader/writer-mr701 | MR701 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ... |
 |
usb hid interface hf 13.56mhz rfid reader - mr761 | MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
 |
ethernet RJ45 interface hf 13.56mhz rfid reader writer - mr730 | MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The rea... |
 |
IIC, UART, USB interface HF 13.56MHz RFID writer and reader Module JMY628 | JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card... |
Same products
 |
Ballistic Plate | Seller: YONGKANG LONGKUI NEW MATERIAL CO.LTD | Ballistic Plate A can be matched with bulletproof vest as the front or back plate to enhance... |
 |
ballistic helmet | Seller: YONGKANG LONGKUI NEW MATERIAL CO.LTD | ballistic helmet A , often referred to as a tactical helmet, is a specialized piece of perso... |
 |
bulletproof vests | Seller: YONGKANG LONGKUI NEW MATERIAL CO.LTD | bulletproof vests stands out as one of the premier manufacturers and suppliers in China, ren... |
 |
Bulletproof Briefcase Shield | Seller: YONGKANG LONGKUI NEW MATERIAL CO.LTD | Bulletproof Briefcase Shield Bulletproof Briefcase Shield Description This is a discreet, r... |
 |
Military Ballistic Helmet | Seller: YONGKANG LONGKUI NEW MATERIAL CO.LTD | Military Ballistic Helmet Welcome to our comprehensive overview of the , a crucial asset in ... |
