SPD for Network / Data Line Surge Protector
Data line surge protectorseries are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage.
Features Of SPD For Network / Data Line Surge Protector
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
RJ45 connector
Application Of SPD For Network / Data Line Surge Protector
CAT5e and CAT5 compatible
10/100 Base-T Ethernet protection
LAN, FDDI，CDDI, ATM
PDH, SDH, SPDH
Industrial control
Loss prevention system device; Security system; Security integration.
IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system
Installation And Wiring Diagram Of SPD For Network / Data Line Surge Protector
Specification OfSPD For Network / Data Line Surge Protector
|
Model |
D05J4 |
D05J4-8 |
D05J4-16 |
D05J4-24 |
D05J8H |
||||
|
Lightning projection zone(LPZ) |
2 |
||||||||
|
Standards Compliance |
IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002 |
||||||||
|
According to IEC61643 |
III |
||||||||
|
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||||||||
|
Max continuous operating voltage Uc |
5V |
||||||||
|
Nominal discharge current (8/20µs) In |
3KA |
||||||||
|
Max discharge current Imax (8/21µs) Imax |
5KA |
||||||||
|
Voltage protection Level @C2(8/20µs) Up |
≤55V |
||||||||
|
Voltage protection Level @C3(1kV/µs) Up |
≤25V |
||||||||
|
Rated load current IL |
200mA |
||||||||
|
Limiting Voltage(10/700µs) |
≤20V |
||||||||
|
Cut-off Frequency fG |
250MHz |
||||||||
|
Response time tA (L-N/N-PE) |
1ns |
||||||||
|
Protection line |
1/2,3/6 |
1/2,3/6,4/5,7/8 |
|||||||
|
Protection port |
1 |
8 |
16 |
24 |
1 |
||||
|
Mounting |
Be Installed between protected equipment and signal line |
||||||||
|
Adapt Transmissionrate |
100Mbps 1000Mbps |
||||||||
|
Transmissionstandards |
100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6 |
||||||||
|
Dimension |
85(H)×25(W)×25(L)mm |
190(H)×85(W)×48(L)mm |
482(H)×86(W)×44(L)mm |
83(H)×25(W)×25(L)mm |
|||||
|
Interface form |
RJ45 |
||||||||
|
IP code(IEC EN 60529) |
IP20 |
||||||||
|
Error rate |
≤10-12 |
||||||||
|
Material/color |
Aluminum/Blue |
||||||||
|
Insertion loss |
≤.3.0dB |
||||||||
|
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95％ |
||||||||
Techwin is a professionalspdsupplierin china.
Send product request
Other supplier products
 |
HD-SDI Video Surge protector | Low insertion loss, fast response time Low limiting voltage precise limiting voltage Large discharge current High transmission rate Low... |
 |
Quarter Wave Surge Protective Device（SPD）N（L16）Access Network RF Protector | Quarter wave RF surge protectoris designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, in... |
 |
SPD for Network / Data Line Surge Protector | Data line surge protectorseries are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from ... |
 |
Surge Protection Device | As an international high-tech enterprise specializing in surge protection device for lightningOEM and ODM, we have 15 years of lightning protection... |
 |
SPD for Audio Surge Protector | With a standard RJ11/45 interface, the audio signal lightning protection device is suitable for audio signal lightning protection of 1 to 4 pairs o... |
