UHF RFID Reader
Introduction
◎ Based on the development of independent intellectual property rights, the reader adapt to the global frequency band setting.
◎ Adopt high-performance Impinj UHF reader chip IndyR2000 to achieve the best Intensive reader mode, the maximum read speed and optimum read ranges.
◎ Application: warehousing and logistics supply chain, fixed asset management, transportation and vehicle management, manufacturing, etc.
Features
◎ Adopt Impinj UHF reader chip and TI ARM embedded processing chips to achieve high-speed reading and data fast operation;
◎ Full support to meet the EPC global UHF Class1 Gen2 / ISO 18000-6C / ISO18000-6B electronic tag standard;
◎ Operating frequency is between 865-868MHz / 902- 928MHZ (can be adjusted according to different countries or regions);
◎ RS232, RS485 and TCP / IP communication;
◎ Support 1, 2, 4 external SMA antenna connections;
◎ Output power reach 32dbm, it is adjustable. Support active mode, command mode and trigger mode;
◎ Reading buzzer and LED status indication; support online upgrade for hardware by communication port;
◎ Reader supply multi I/O input output connectors, convenient for device to integrate and application;
◎ Highly reliable design for industrial structure to meet the demanding work of environment;
Specification
Model VF-642
Performance Index
Frequency range: 865-868MHZ, 902-928MHZ (can be customized)
Frequency modulation: FHSS or fixed-frequency, can be set by software
RF output: +10.0 to +32.5 dBm; 50 ohm load.
The number of antennas: 1 SMA antenna connector; 2 SMA antenna connector; 4 SMA antenna connectors for selections
Communication interface: 10M/100MAdaptive Ethernet; RS232; RS485; Wiegand26/34 interface
Communication rate: Serial rate 9600~115200bps, RJ45 is 10Mbps
Secure firmware upgrade: The upgrade mechanism can be extended
input / output (GPIO) 2 inputs, 1 output
Application software: Supply API SDK and VC and VB, Java application routines
Tag Operation Performance
Reading distance: 8dbi Antenna configuration, typical read range: 3 ~ 20 m (depends on tag)
Protocol: EPC global UHF Class 1 Gen 2 / ISO 18000-6C/ ISO18000-6B
Maximum receiver sensitivity: -82 dBm; Maximum return loss: 10 DBm
Mechanical electrical performance
Dimension: 220 (L) * 200 (W) * 48 (H) mm
Power: With 220V AC input, the output of +12 V/3A DC power converter
Weight: <2Kg
Humidity: 5% to 95%, Non-condensing
IP rating: IEC IP55
Operating Temp.: -20 ºC to +60 ºC
Storage Temp.: -40°C to 80°C
Other supplier products
|
|
UHF RFID Handheld Reader |
Introduction
◎ Based on independent intellectual property development, adapt reader to work with
global frequency range;
◎ High performance model w... |
|
|
UHF RFID Reader |
Introduction
◎ Based on the development of independent intellectual property rights, the reader adapt to the global frequency band setting.
◎ Adopt... |
All supplier products
Same products
