Glue Dispenser
Glue dispenser
The glue dispenser with time control, to push the liquid.
Penumatically, the glue dispenser controlled by timer, to be sure the same dispensing drops and dispensing cycle time, regulated.
The air pressure with suitable tip at the glue dispenser of the different.
Liquids as glues, greases, solder plasma. Glue dispenser will be applied for 10 types of steel tips and 5 types of plastic tips for
Various customers' needs. Glue dispenser instruction:
1. Power switch: Turns unit on and off. Indicate "ON"position.
2. Air pressure regulator/gauge: Controls and indicates air pressure to the dispense circuit(the handle of regulator shuld be pulled out to adjust).
3. Mode switch: Places the dispense circuit in automatic or manual shot mode.
4. Timer control: Adjust the glue dispenser is shot of the auto dispense mode.
5. Vacuum control: Adjust the glue dispenser intensity of "suck back"vacuumapplied to the dispense circuit.
6. Dispense outlet: Provide a quick connect receptacle for dispense air circuit.
7. Socket of foot-switch: Activates the glue dispenser dispense circuit.
8. Air-in tube: Glue di has high-pressured air input.
9. Dispensing control: Four grades for the dispensing cycle time.
Other supplier products
|
|
Fiber curing oven |
Fiber curing oven
1. This fiber curing oven uses Liquid Crystal Display (LCD) to be clear, the contact surface is friendly.
2. The fiber curing ... |
|
|
Glue Dispenser |
Glue dispenser
The glue dispenser with time control, to push the liquid.
Penumatically, the glue dispenser controlled by timer, to be sure the sa... |
|
|
Fiber polishing fixture |
The fiber polishing fixture is IPC Structure, Independent compression of each connector. This fiber polishing fixture pass rate with Interference> ... |
|
|
CE Fiber Polishing Machine |
Fiber polishing machine
The fiber polishing machine can process each kind of standard fiber optic connector: FC, SC, LC, ST, MTRJ, MPO, MTP, E2000... |
|
|
Polishing Jig |
Polishing jig
The polishing jig is IPC structure, Independent compression of each connector. Polishing jig pass rate with Interference> = 98% (100... |
All supplier products
Same products
