LC SX fiber optic patch cord
Definition：
Fiber optic patch cord refers to the optical fiber that can be connected to desktop computer or device directly, convenient for device’s connectivity and management. The patch cord is used from device to fiber optic cabling connection. It has thick layer of protection, and is usually used in the connection between the optical and the terminal box.Structure
Fiber optic patch cord is similar to coaxial cable, only without mesh shield. Its center is core of glass for light propagation. The diameter of core is 15μm~50μm in multi-mode optical fiber, equal to the thickness of human hair. But the diameter of single-mode optical fiber core is 8μm~10μm. The core surrounded by a layer of lower refractive index than the core of the glass envelope keep the optical fiber in the core. And then the outside is a thin layer of plastic jacket to protect the envelope.Classification:
According to different transmission media, fiber optic patch cord can be divided to common silicon-based optical fiber, Single-mode and Multi-mode patch cord, and other fiber optic patch cord that transmit through media such as plastic.According to connector structure styles, it can be divided to patch cord of FC, SC, ST, LC, MTRJ, MU, E2000, DIN4, etc.
Single-mode fiber: Cable Color is yellow. The connector and protective sleeve are blue. Its transmission distance is longer
Multi-mode fiber: Cable color is orange or grey. The connector and protective sleeve are beige or black. Its transmission distance is shorter
According to Outer protection layer materials, it can be divided to PVC and LSZHType
LC
PC UPC APC
Insertion loss ≤0.2dB
Return loss >50dB
Exchangeability ≤0.2dB
Repeatability ≤0.2dB
Vibration test <0.10dB(10-60Hz,1.5mm amplitude)
Drop test <0.10dB（Height:1.5m，8 times）
Tensile strength <0.10dB（68.6N，10 min）
Mechanical Durability <0.20dB（>500 times）
High-Temperature test <0.20dB（+85℃，Last 168 hours ）
Low-Temperature test <0.20dB（-40℃，last 168 hours）
Temperature cycling test <0.20dB（-40℃~+75℃，95%R.H，21 periods，168 hours）
humidity test <0.20dB（+25℃~+65℃，relative humidity 95%，168 hours later
Enface size radius of curvature：7-25(PC/UPC SM) 5-12(APC SM)
apex offset：0-50um Fiber sag：-100 to +100nmFeatures:
1. Low insertion loss
2. High return loss
3. Good repeatability
4. Good exchangeability
5. Excellent environmental adaptability
ApplicationsTelecommunication, FTTX+LAN, FTTH, Video Transmission, Optical
Fiber Sensor, Testing equipment, CATVNotices1. Don’t bend and circle the fiber optic patch cord excessively; this will increase the attenuation of light transmission.
2. The optical module transceiver wavelength of both ends of fiber optic patch cord must be consistent, which means it should be the same wavelength of optical module at the two ends of it.
3. Must use the protective cover to protect the connectors, to avoid that dust and oil would damage the optical fiber coupling.
Other supplier products
|
|
The CPE three RJ11 ADSL Splitter |
ADSL Splitter
1 manufacturer
2.Size:59*44*23(mm)
3 warranty:one year
4 delivery time:3 days 5 Package:PE bag
Remarks:AS-GC2 can eliminate... |
|
|
SC fiber optic adapter |
Product Introduction
Fiber Optic Adapter, also named as Fiber Optic Coupuer, is device that can
disassemble and connect between the fiber and th... |
|
|
LC SX fiber optic patch cord |
Definition：
Fiber optic patch cord refers to the optical fiber that can be connected to desktop computer or device directly, convenient for device’... |
|
|
PSTN and DSLAM MDF Splitter |
Main market:It is used in South America
Character 1:It is for local side
Character 2:It is used into inserting module
Function
PSTN and DSLAM MDF ... |
|
|
ABS BOX PLC SPLITTER |
ABS Box PLC splitter application
Installation on 19 inch standard rack, when optical fiber branching home, The installation of equipment provided b... |
All supplier products
Same products
