1000base SX SFP Cisco Compatible
Product Description
1.25G SFP
Applications
Switch to Switch interface
Switched backplane applications
Router/Server interfac
ATM
SONT/SDH/PDH
FDDI
Fiber Channel
Other optical transmission systems
Standard
Compatible with SFP MSA
Compatible with IEEE 802.3z
Compatible with ANSI specifications for Fibre Channel
Compatible with FCC 47 CFR Part 15, Class B
Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I
Compatible with Telcordia GR-468-CORE
RoHS compliance
Description
The SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 20km transmission distance with SMF.
The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
The standard serial ID information compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP Multi-Source Agreement (MSA).
The SFP transceivers are compatible with RoHS.
Regulatory Compliance
The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to Howfflink regulatory specification and safety guidelines, or contact with Howfflink, Inc.
EEPROM Information:
The serial SFP module contains an EEPROM. It provides access to sophisticated identification information that describes the transceiver’s capabilities, standard interfaces, manufacturer. The serial interface uses the 2-wire serial CMOS EEPROM protocol defined for the ATMEL AT24C01A/02/04 family of components. When the serial protocol is activated, the host generates the serial clock signal (SCL MOD_DEF1). The positive edge clocks data into those segments of the EEPROM that are not write-protected within the SFP transceiver. The negative edge clocks data from the SFP transceiver. The serial data signal (SDA MOD_DEF2) is bi-directional for serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.
The module provide diagnostic information about the present operating conditions. The transceiver generates this diagnostic data by digitization of internal analog signals. Calibration and alarm/warning threshold power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring all are implemented. The diagnostic data are raw A/D values and must be converted to real world units using calibration constants stored in EEPROM locations 56-95 at wire serial bus address A2h. The diital diagnostic memory map specific data field define ad following.
Send product request
Other supplier products
 |
2.5G/1.25G GPON ONU transceiver | Product Description XSFF-GPON-ONU-2.5G1.25G FEATURES Class B+ Optical Line Terminal (OLT) for ITU-T G.984 Gigabit-capable PON 2.488 Gbps / 1... |
 |
10/100M单模单纤20公里收发器 | 产品描述10M/100M双向光纤媒体转换器，内置电源 说明：的XTR100系列包括一个100Base-FX的自动协商模式，媒体转换器的10/100Base-TX系列。用户现在可以升级或扩展其现有的100BASE-TX或10BASE-T网络，很容易进入光纤网络。 XTR100系列完全兼容IEEE... |
 |
10/100/1000M SFP slot Media Converter | Gigabit Ethernet Bridge Media Converter XTR1000-SFP-SM1310-xxkm XTR1000-SFP-MM850 XTR1000-SFP-MM1310 XTR1000-SFP-LD1310-xxkm-LC XTR1000-SFP-... |
 |
10/100M SFP slot with 2 RJ45 ports Media Converter | Product Description 10M/100M SFP-2RJ45 Fiber Media Converter XTR-SFP-2RJ45-XX Description: The Media ConverterXTR-SFP-2RJ45 series consists... |
|
|
1000base SX SFP Cisco Compatible | Product Description 1.25G SFP Applications Switch to Switch interface Switched backplane applications Router/Server interfac ATM SONT/SD... |
Same products
 |
Indoor Wall Mounted Mini Fiber Optic FTTH Terminal Box 4 Ports White | Seller: Shenzhen UnitekFiber Solution Limited | UnitekFiber supplies 4 ports wall mounted opticsFaceplate & FTTH Terminal Box. This fiber opt... |
 |
Introduction of Bulk Fiber Optic Cables Assembly | Seller: Shenzhen UnitekFiber Solution Limited | Bulk fiber optic cable for saleassemblies are convenient and economical fiber cable devices to ru... |
 |
Description of breakout fiber optic cable | Seller: Shenzhen UnitekFiber Solution Limited | optical breakout cablealso can be called as distribution fiber optical cable is designed for Indo... |
 |
AOC Active Optical Cable 40G QSFP to-4 x 10G SFP+ Breakout AOC Cable 5M | Seller: Shenzhen UnitekFiber Solution Limited | Active optical cable, as a main transmission medium for high-performance computers and data cente... |
 |
Introduction of Anti-rodent Fiber Optic Cable | Seller: Shenzhen UnitekFiber Solution Limited | The rodent proof fiber optic cableis suitable for use in many places with lots of rats. The anti ... |
