5W SMA RF Termination Dummy load 6GHz 8GHz 10GHz 12GHz 18GHz 26.5GHz 50ohm
Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves.
| 5W SMA RFTerminator,dummy load 6/8/10/12/18/26.5GHz 50ohm | |
| Norminal Impendance | 50ohm |
| Frequency range | DC-6/10/12/18/26.5GHz |
| VSWR |
6GHz≤1.2 |
| Power rating | 5W |
| Temperature range | -55℃ to 125℃ |
Send product request
Other supplier products
 |
5W SMA Attenuator 3GHz 6GHz 8GHz 12Ghz 18Ghz 26.5Ghz 3dB 6dB 10dB 20dB 30dB 50ohm | Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that... |
 |
Bidirectional 50W coaxial Fixed attenuator 3Ghz 4GHz 6GHz 8.5GHz 10GHz 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 15dB 20dB 30dB 40dB 50dB 50 ohm | Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that... |
 |
2W SMA Attenuator 6GHz 18Ghz 3dB 6dB 10dB 20dB 30dB | Fixed attenuators are placed in signal paths to reduce power transmission and are set at a fixed attenuation by symmetrical resistive networks that... |
|
|
5W SMA RF Termination Dummy load 6GHz 8GHz 10GHz 12GHz 18GHz 26.5GHz 50ohm | Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a ... |
Same products
 |
Radio Tool Setter | Seller: Harbin Pioneer M&E Technical Development Co.,Ltd | RP610T radio tool setter is a wireless tool setter, radio coded signals are used to transmit info... |
 |
Radio Probe System | Seller: Harbin Pioneer M&E Technical Development Co.,Ltd | Radio Probe System The wts radio communication probe system is suitable for various complex worki... |
 |
CNC Machine Tool Touch Probe Stylus | Seller: Harbin Pioneer M&E Technical Development Co.,Ltd | As an important component of the probe measurement system, the probe stylus/sensor is mainly comp... |
 |
Optical Tool Setter | Seller: Harbin Pioneer M&E Technical Development Co.,Ltd | OTC200 optical tool setter/optical tool presetter is a wireless tool setter, optical coded signal... |
 |
OPS-30 Optical CNC Probe System | Seller: Harbin Pioneer M&E Technical Development Co.,Ltd | OPS30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optica... |
