HUAWEI OSN3500 SUBRACK
HUAWEI OSN3500 SUBRACK
Transport Network
The test frame is a data packet that is used to test the connectivity status of the network on the SDH side that transmits Ethernet services. The test frame is mainly used for commissioning Ethernet services or locating Ethernet service faults. Configuration of test frames does not affect services.
The test frame function complies with the Huawei internal standard, and can be transmitted and received only between VCTRUNK ports.
Basic Concepts
To ensure the normal use of test frames, the bearer modes of the interconnected boards must be the same.
Bearer Modes
The bearer mode indicates the encapsulation format of a test frame. Different bearer modes correspond to different test frames. If the bearer mode of the received test frame is different from the bearing mode at the receive end, the test frame is discarded directly, without being processed. Take the N4EFS0 of version V100R008 for example, it supports two bearer modes: Ethernet and GFP.
A packet using the Ethernet bearer mode adopts the format of an Ethernet packet. The transmission path of a packet that is constructed by the CPU is the same as that of a normal Ethernet packet.
A packet using the GFP bearer mode adopts the format of a GFP frame, and the transmission path is the same as that of a GFP frame.
If a VCTRUNK port using the Ethernet mode receives a test frame in GFP format, the port does not process the test frame.
Transmit Mode
The transmit mode is available in three types:Continue,Burst, andDisable.
TheContinuemode indicates that test frames are continuously transmitted, approximately one per second.
TheBurstmode indicates a burst test. A specified number of test frames are transmitted at an interval of approximately one second.
TheDisablemode indicates that transmitting test frames is disabled.
The transmit direction is in the SDH direction only.
Send product request
Other supplier products
 |
Huawei NetEngine NE40E-X8 Series Router CR5P08BASD70 | Huawei NetEngine NE40E-X8 Series Router CR5P08BASD70 Huawei network Routers Model:Huawei NetEngine NE40E-X8 Series Router CR5P08BASD70 Detail:... |
 |
Huawei Quidway S5700 Switch | Huawei Quidway S5700 Switch Huawei Switch Model:S5700-28P-PWR-LI-AC 02353175 Huawei Quidway S5700 Switch Detail:24 Ethernet 10/100/1000 PoE+ por... |
 |
Huawei S6700 Series Switches | Huawei S6700 Series Switches Huawei Switch Model:Huawei S6700 Series Switches Detail:The industry's highest-performing fixed switches, Huawei S6... |
 |
Huawei S1700 Series Switches | Huawei S1700 Series Switches Huawei Switch Model:S1720-52GWR-PWR-4X - Huawei S1700 Series Switches Detail:S1720-52GWR-PWR-4X(48 Ethernet 10/100/10... |
 |
Cheap Huawei NetEngine NE40E-X8 Series Router Network Switching Router | Huawei NetEngine NE40E-X8 Series Router CR5P08BASD70 Huawei network Routers Model:Huawei NetEngine NE40E-X8 Series Router CR5P08BASD70 Detail:NE... |
Same products
 |
VHF UHF Band 200 to3600MHz RF Dual Junction Drop in Isolator high isolation TAB | Seller: UIY Inc. | Model NO.: UIYDDI5025A Type: VHF UHF RF Dual Junction Isolator Brand Name: UIY Bandwidth: 30... |
 |
GP-AP450 5.8GHz 450M Industrial Car Wireless AP | Seller: GPSENKE Network ICT | GP-AP450 is a high performance, high bandwidth, multi-functional and outdoor industrial dual-freq... |
 |
1775M WiFi6 Outdoor Wireless Access Point | Seller: GPSENKE Network ICT | GP-AP1800AX-FS outdoor AP product is based on IEEE802.11ax technology independently developed by ... |
 |
SPD for Network / Data Line Surge Protector | Seller: Shenzhen Techwin Lightning Technologies Co., Ltd | Data line protector series are mainly used in TCP/IP communication networks to protect electrical... |
 |
WiFi IP Phones SC-2168-WP | Seller: Suncomm Technology., Ltd. | Key Features Wireless working frequency 2.4GHz/ 5.8GHz. HD Voice: HD Codec, HD HD Voice: HD Codec... |
