HUAWEI OSN3500 SUBRACK
HUAWEI OSN3500 SUBRACK
Transport Network
The test frame is a data packet that is used to test the connectivity status of the network on the SDH side that transmits Ethernet services. The test frame is mainly used for commissioning Ethernet services or locating Ethernet service faults. Configuration of test frames does not affect services.
The test frame function complies with the Huawei internal standard, and can be transmitted and received only between VCTRUNK ports.
Basic Concepts
To ensure the normal use of test frames, the bearer modes of the interconnected boards must be the same.
Bearer Modes
The bearer mode indicates the encapsulation format of a test frame. Different bearer modes correspond to different test frames. If the bearer mode of the received test frame is different from the bearing mode at the receive end, the test frame is discarded directly, without being processed. Take the N4EFS0 of version V100R008 for example, it supports two bearer modes: Ethernet and GFP.
A packet using the Ethernet bearer mode adopts the format of an Ethernet packet. The transmission path of a packet that is constructed by the CPU is the same as that of a normal Ethernet packet.
A packet using the GFP bearer mode adopts the format of a GFP frame, and the transmission path is the same as that of a GFP frame.
If a VCTRUNK port using the Ethernet mode receives a test frame in GFP format, the port does not process the test frame.
Transmit Mode
The transmit mode is available in three types:Continue,Burst, andDisable.
TheContinuemode indicates that test frames are continuously transmitted, approximately one per second.
TheBurstmode indicates a burst test. A specified number of test frames are transmitted at an interval of approximately one second.
TheDisablemode indicates that transmitting test frames is disabled.
The transmit direction is in the SDH direction only.
在线联系供应商
Other supplier products
 |
Huawei S9300 Series Switch | Huawei S9300 Series Switch Huawei Switch Model:LE0KS9312 Huawei S9300 Series Switch Detail:S9312 Assembly Chassis Overview(LE0KS9312) S9312 Assembl... |
 |
Huawei CR5P5KBTBD61 2356709 NetEngine5000E-X16A 100G (BTB) BasicConfiguration DC | Huawei CR5P5KBTBD61 2356709 NetEngine5000E-X16A 100G (BTB) BasicConfiguration DC Huawei network Routers Overview(CR5P5KBTBD61) Huawei NetEngine5... |
 |
Huawei OptiX Metro 1000 | Huawei OptiX Metro 1000 Transport Network The OptiX 155/622H adopts the compact case-shaped design. Hence, it can be used as stand-alone equipment ... |
 |
Huawei S2700 Series Switch | Huawei S2700 Series Switch Huawei Switch Model:S2700-52P-PWR-EI Huawei S2700 Series Switch Detail:S2700-52P-PWR-EI(48 Ethernet 10/100 PoE+ por... |
 |
intelligent transportation network router | intelligent transportation network router Huawei NetEngine NE20E Series Router CR2M08BASA02 Huawei network Routers Model:Huawei NetEngine NE20E ... |
Same products
 |
VHF UHF频段200 - 3600mhz射频双结下降隔离器 | 卖方: UIY Inc. | 型号：: UIYDDI5025A类型：VHF超高频射频双结隔离器品牌名称：UIY频率范围：200 ~ 3600MHz带宽:30%最大插入损耗（dB）： 0.5隔离最小值（dB）： 50VSWR最... |
 |
GP-AP450 5.8GHz 450M Industrial Car Wireless AP | 卖方: 北京光普森科科技有限公司 | GP-AP450 is a high performance, high bandwidth, multi-functional and outdoor industrial dual-freq... |
 |
1775M WiFi6 Outdoor Industrial Wireless AP | 卖方: 北京光普森科科技有限公司 | GP-AP1800AX-FS户外AP产品是GPSENKE自主研发的基于IEEE802.11ax技术的产品。 GP-AP1800AX-FS支持802.11b/g/n/ac/ax标准，双频最大带宽... |
 |
SPD for Network / Data Line Surge Protector | 卖方: Shenzhen Techwin Lightning Technologies Co., Ltd | Data line protector series are mainly used in TCP/IP communication networks to protect electrical... |
 |
WiFi IP Phones SC-2168-WP | 卖方: Suncomm Technology., Ltd. | Key Features Wireless working frequency 2.4GHz/ 5.8GHz. HD Voice: HD Codec, HD HD Voice: HD Codec... |
