Rubber Mooney viscometer

• 

Test principle:

The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loaded into the mold cavity of the Mooney viscometer and the motor was started after preheating, and the rotor began to rotate and a certain shear torque was applied. At the same time, the rubber sample produces an equal and opposite resistance moment, which is displayed by the dial indicator installed at one end of the worm or directly through the computer, that is, the Mooney viscosity value.

Reference standard:

GB/T 1232 unvulcanized rubber - Determination of Mooney viscosity

GB/T 1233 rubber compound -- Determination of initial vulcanization characteristics -- Mooney viscometer method

HG-T 3242-2017 Rubber Mooney viscometer

ISO289 unvulcanized rubber -- determination by shear disc viscometer

ISO667 rubber compound - Determination of initial vulcanization characteristics - Mooney viscometer method

Technical parameters:

Measurement and control temperature range: normal temperature ——200℃

Torque measuring range: 0-100 Mooney value

Calibration accuracy: 100±0.5 Mooney value

Rotor speed: 2±0.02 RPM

Measurement time: 0-200 points

Ambient temperature: 0-35℃

Relative humidity: <80%

Test pressure: 11.5KN±0.5KN

Air pressure: 0.45-0.6MPa

Test requirements:

1) Scope: This specification specifies the test method of Mooney viscosity of rubber compound.

Note: Measuring range includes: Mooney viscosity.

2) Test tools: Mooney viscometer, electronic scale, scissors, heat insulation gloves

3) Sample requirements: Cut two rubber samples with a diameter of about 45mm and a thickness of about 3mm from the bubble-free rubber material, one of which has a circular hole with a diameter of about 8mm in the center of the sample (two pieces of rubber material weigh about 16g)。

4) Test conditions: the rubber material can be tested for more than 2 hours under laboratory conditions after processing, but not more than 10 days.

Other supplier products

	Gas Hazardous Characteristics Tester	Product Introduction This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure f...
	Deval abrasion testing machine	Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar...
	Laminoplasty Plate System Fatigue Testing Machine	Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Defines ...
	Flame retardant paper and board burning tester	Technical parameters 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :{<}85% 3. Power supply voltage and power :220V 10% 5...
	Large - Scale Bending Tester STD - FB2 - L	TheLarge Bending Tester accurately and quickly measures factors related to curvatures in small bending moments (bending hardness and recoverability...

Same products

	2-in-1 Matte Liquid Lip Liner & Lip Tint Marker Pen	Seller: Zhejiang Meixi Cosmetics Co., Ltd.	Dual-Function Design Functions as both a liquid lip liner and a lip tint, allowing users to outli...
	WATERPROOF MATTRESS ENCASEMENT	Seller: SHIJIAZHUANG YINGFANG TRADE CO.,LTD	Product Name: Waterproof Mattress Encasement/Mattress Protector(Bed Bug)/Mattress Cover Material...
	WATERPROOF BAMBOO MATTRESS PROTECTOR	Seller: SHIJIAZHUANG YINGFANG TRADE CO.,LTD	Product Name:Waterproof Bamboo Mattress Protector/Mattress Cover Fabric:15%bamboo/85%polyester,3...
	Fabric Flame Retardant Tester	Seller: Qinsun Instruments Co., LTD	Product details A method is used to determine the damaged area and the length of the damage when...
	Burning Manikin System	Seller: Qinsun Instruments Co., LTD	Product details The burning manikin system is used to test the overall thermal protection perfor...