Rubber Mooney viscometer
Test principle:
The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loaded into the mold cavity of the Mooney viscometer and the motor was started after preheating, and the rotor began to rotate and a certain shear torque was applied. At the same time, the rubber sample produces an equal and opposite resistance moment, which is displayed by the dial indicator installed at one end of the worm or directly through the computer, that is, the Mooney viscosity value.
Reference standard:
GB/T 1232 unvulcanized rubber - Determination of Mooney viscosity
GB/T 1233 rubber compound -- Determination of initial vulcanization characteristics -- Mooney viscometer method
HG-T 3242-2017 Rubber Mooney viscometer
ISO289 unvulcanized rubber -- determination by shear disc viscometer
ISO667 rubber compound - Determination of initial vulcanization characteristics - Mooney viscometer method
Technical parameters:
Measurement and control temperature range: normal temperature ——200℃
Torque measuring range: 0-100 Mooney value
Calibration accuracy: 100±0.5 Mooney value
Rotor speed: 2±0.02 RPM
Measurement time: 0-200 points
Ambient temperature: 0-35℃
Relative humidity: <80%
Test pressure: 11.5KN±0.5KN
Air pressure: 0.45-0.6MPa
Test requirements:
1) Scope: This specification specifies the test method of Mooney viscosity of rubber compound.
Note: Measuring range includes: Mooney viscosity.
2) Test tools: Mooney viscometer, electronic scale, scissors, heat insulation gloves
3) Sample requirements: Cut two rubber samples with a diameter of about 45mm and a thickness of about 3mm from the bubble-free rubber material, one of which has a circular hole with a diameter of about 8mm in the center of the sample (two pieces of rubber material weigh about 16g)。
4) Test conditions: the rubber material can be tested for more than 2 hours under laboratory conditions after processing, but not more than 10 days.
在线联系供应商
Other supplier products
 |
Surface Performance Tester STD-FB4 - A | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by artisans and professionals when judging a fabric&rsquo... |
 |
Athletic Footwear Shock Attenuating Tester | The Athletic Footwear Shock Attenuating Tester is primarily used to test the shock energy absorption performance of single materials or material st... |
 |
Chest Drainage Tester | The thoracic drainage tester is widely applied in the medical field, mainly used for monitoring and evaluating the performance of thoracic drainage... |
 |
Konan Tester | Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.5.1 Test 1(b): Kernan... |
 |
Photovoltaic module insulation resistance tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta... |
Same products
 |
Accumulation Type Powder Spraying Line | 卖方: Hebei Zhanyao Intelligent Equipment Technology Co., Ltd. | Accumulation Type Powder Spraying Line Accumulation Type Powder Spraying Line ZHYAO specializes ... |
 |
Automatic Powder Coating Equipment | 卖方: Hebei Zhanyao Intelligent Equipment Technology Co., Ltd. | Automatic Powder Coating Equipment Automatic Powder Coating Equipment ZHYAO focuses on the ... |
 |
Automated Powder Coating Systems | 卖方: Hebei Zhanyao Intelligent Equipment Technology Co., Ltd. | Automated Powder Coating Systems Automated Powder Coating Systems High Efficiency: Automate... |
 |
Manual Powder Coating Line Manufacturer | 卖方: Hebei Zhanyao Intelligent Equipment Technology Co., Ltd. | Manual Powder Coating Line Manufacturer Manual Powder Coating Line manual powder coating li... |
 |
Automatic Powder Coating Line | 卖方: Hebei Zhanyao Intelligent Equipment Technology Co., Ltd. | Automatic Powder Coating Line High-Speed Operation: faster production with minimal downtim... |
