KH FT WAX 105

The Fischer-drop point wax are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be saturated, straight-chain hydrocarbons. Their very linear molecular structure results in high melting points, low viscosity, and good hardness.

In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant. It has a relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-drop point waxhas a low molecular weight, low melt viscosity, high melting point, and narrow melting range, the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has an irreplaceable advantage over PE wax.

KH FT Wax 105 uses the feedstock from coal, They have a fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax 105 can reduce the dosage by about 15%-50% compared to paraffin wax and PE wax.

In the processing and production of a masterbatch, KH FT wax 105 can effectively wet and penetrate into the pores of the agglomerated particles to coat the surface of the pigment, and better disperse the pigment aggregate under the action of the shearing force to effectively prevent re-agglomeration

Features of KH FT WAX 105

High melting point

High stability

Low viscosity

Low oil content

Good hardness

Our KH FT WAX 105 is complied with:

FDA 21CFR175.105(Hot Melt Adhesives Additives)

If you had other FDA requirements, please contact us:

Storage of KH FT WAX 105

Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.

Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.

Application of KH FT WAX 105

In PVC processing as the lubricants;

Hot melt adhesives;

Masterbatches;

Rubber industries;

Pigment and coating;

Polishes;

If you need any kinds of polish wax, please contact us, as a professional wax supplier, King Honor is willing to offer you high quality products.

Other supplier products

	Textile Wax	Fully refined paraffin waxis one of the textile processing accessories. The product subdivision has yellow wax, green wax, white wax, and blue wax....
	Wax Emulsion	What is wax emulsion Paraffin wax emulsion is a multi-phase emulsion in which materials such as natural wax and synthetic wax are dispersed in wat...
	Microcrystalline Wax	Microcrystalline wax is obtained from petroleum distillation residual heavy fractions by solvent separation, refining and hydrogenation. It is a co...
	Paraffin Wax Emulsion PWE 50SA	Wax emulsion formulationPWE 50SA is a high transparency, high gloss emulsified paraffin wax. It is recommended for use in applications which requir...
	KH FT WAX 100	KH FT WAX 100 is the coal-based Fischer-Tropsch synthetic paraffin waxby hydrogen refinery. It has low oil content and good high melting point. It'...

All supplier products

Same products

	KH Paraffin Wax 80M	Seller: King Honor International	paraffin and microcrystalline waxconsist of saturated aliphatic hydrocarbons. It is different fro...
	KH Paraffin Wax 70H	Seller: King Honor International	KH Paraffin Wax S70H is made by deep refinement. Compared to KH paraffin wax in bulk S70N/L, Its ...
	KH FT WAX 105	Seller: King Honor International	The Fischer-drop point wax are made from carbon monoxide and hydrogen in the presence of the sele...
	KH FT WAX 100	Seller: King Honor International	KH FT WAX 100 is the coal-based Fischer-Tropsch synthetic paraffin waxby hydrogen refinery. It ha...
	High Melting Point Paraffin Wax	Seller: King Honor International	Wax with high melting point is ideal for various industrial fields, such as paper, PVC, adhesives...