Flooring Radiant Panel Test Apparatus
Standards
ISO 9239-1: Flooring fire reaction test - Part 1: Combustion performance of flooring materials tested by radiantheat
ASTM E 648: Critical Radiant Flux of Floor standard test - covering system uses radiant heatenergy
ASTM E 970: Using a Radiant Heat Energy Source, test insulationfloorinsulationinsulationstandardtestforCriticalRadiantFlux
using a radiant heat energy.
NFPA 253: Standard Test Method for using radiant heat energy, test plates overlay system Critical RadiantFlux
Main Features
1. All structural components are made of stainless steel, nice appearance, corrosion resistance;
2. The radiation source is a porous ceramic heat radiating plate 300mmX450mm, tilted 30 °;
3. Imported calorimeter from US Medtherm company, range 50KW /m;
4. Igniters diameter of 0.7mm from the bottom of the center line of each 60-degree position accordingtostandardrequest.
5. The standard plate is made of thick 20 ± 1mm, density 850 ± 100kg / m³ without coating made of calcium silicate board; size 1050X250mm
6. Small stainless steel auxiliary ignition burner ignited sample.
7. Imported flow control meter from Japan, precise control of the flow of propane
8. Equipped with air blower providing air, mixed gas through the venturi mixing test gas,
9. The specimen holder is made of stainless steel and an overall dimension of 1140mm x 320 mm.
Optical system
1. The optical system comprising a light source color temperature is 2900 ± 100 K incandescent,lightreceivingsilicon photodiode with an optical path test shutter, 0% and 100%, to facilitate the use of calibration;
2. Imported light battery module measuring light attenuation. The system automatically calculates and generates a light transmittance curve translucent; printable Scribble
3. One button automatic and five level calibration system by computer.
Thermal radiation system
1. Heat radiation pyrometer accuracy of ± 0.5 ºC, away from the radiation board about 1.4m;
2. Radiation pyrometer sensitivity constant in the wavelength range 1um ~ 9um;
3. High-performance K-type thermocouples diameter 1mm, having insulation and ungrounded hot junction; in the lower box roof 25mm, the inner wall of the rear housing flue 100mm;
4. Radiation pyrometer to detect a diameter in the range of 250mm, blackbody radiation temperature within a temperature range of 480 ºC ~ 1200 ºC ;
5. USA imported heat flux sensors with NIST traceable calibrator with a minimum resolution of 0.01 mV.
Control System
1. Window + Labview system to realize automatictestsysterm
2. Equipped with audible alarm and alarm display functions accidents.
3. The control box USB / RS232 serial port,externaldesktop/notebookcomputeroperation control, free to print the test report.
4. Automatic calibration system.
Specification
Pover:AC220V±10%, 50Hz;5KW;
Size:Test stand(Length1.4× width1.0× High2.2)m;
Control box: 600(W)×750(D)×1600(H)mm
Weigth:350Kg.
Send product request
Other supplier products
 |
Coatings Shear Fatigue Tester | Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
 |
Sliding Bearing Fatigue Testing Machine | Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re... |
 |
MARK II Slip Resistance Tester | Application: MARK II Slip Resistance Tester used the the principle of the ratio of load horizontal force to vertical force, test the maximum stati... |
 |
Helmet Webbing Micro - displacement Abrasion Tester | Main Purposes It is used to detect the abrasion condition of the webbing, the micro - displacement performance of the webbing, and the fatigue lif... |
 |
NFPA 701-1 Flammability Tester | Introduction This tester mainly based on NFPA 701 R & D and the United States NFPA 701 that provides fabric and film flame propagation test me... |
Same products
 |
Fabric Flame Retardant Tester | Seller: Qinsun Instruments Co., LTD | Product details A method is used to determine the damaged area and the length of the damage when... |
 |
Burning Manikin System | Seller: Qinsun Instruments Co., LTD | Product details The burning manikin system is used to test the overall thermal protection perfor... |
 |
Steel Structure Fireproof Coatings | Seller: Qinsun Instruments Co., LTD | Product Introduction: Heat insulation efficiency and fire resistance test furnace of steel struc... |
 |
Building material combustion calorific value calorimeter | Seller: Qinsun Instruments Co., LTD | Product details Building material combustion calorific value calorimeter Mainly used for the det... |
 |
Thermal Insulation Rock Wool Thermal Load Tester | Seller: Qinsun Instruments Co., LTD | Introduction： This equipment determines the temperature at which rock wool insulation shrinks un... |
