Textile water evaporation rate tester
Standard:
The design and operation of this tester are aligned with key international and national standards related to assessing the moisture management and drying characteristics of textiles, including:
AATCC Test Method 201
AATCC Test Method 199
AATCC Test Method 200
ASTM E96
Product Advantages:
This Textile Water Evaporation Rate Tester offers significant advantages for laboratories and manufacturers focused on textile performance:
Objective Performance Evaluation: Provides a quantitative and repeatable method for assessing quick-drying, eliminating subjective evaluations.
Simulates Real-World Conditions: Can simulate conditions similar to those experienced when moisture evaporates from fabric in contact with the skin or in specific environmental conditions.
High Accuracy and Repeatability: Utilizes precise measurement systems (e.g., sensitive balance, controlled environment) to ensure reliable and consistent test results.
Efficient Testing: Allows for relatively quick determination of drying rates compared to some other methods.
Data Analysis Capabilities: Often paired with software for real-time data acquisition, visualization of drying curves, and comprehensive report generation.
Scope of Application：
This instrument is used for testing and evaluating the moisture absorption and quick-drying performance of various textiles. The quick-drying property of textiles is assessed by measuring the rate of water evaporation.
Instrument Features：
Equipped with imported high-precision balance, accuracy 0.001g.
Institutional self-locking function to prevent accidents after sudden power failure, ensuring safer use.
Uses high-quality drive motors for smooth operation and low noise.
Optimized structural design for precise positioning.
Can test up to 6 workstations simultaneously or select the number of workstations as needed.
Flexibly set the weighing interval time for experiments.
Test termination condition: evaporation rate change does not exceed 1%.
Automatically generates test result curves.
Automatically calculates evaporation rate, ensuring accurate test data.
Technical Parameters：
| Sensor Accuracy | 0.001g |
| Sample Weight | < 100g |
| Sample Weighing Interval | ≥1 minute |
| Applicable Sample Size | 100mm × 100mm |
| Power Supply and Power | AC220V ± 10V, 50Hz, 200W |
| Instrument Dimensions (L×W×H) | 500 × 450 × 665mm |
| Instrument Weight | 40kg |
| Number of Workstations | 6 workstations (6 motors independently controlled) |
| Control Mode | Computer software upper computer control |
Send product request
Other supplier products
 |
Fully Automatic Continuous Flow Reaction Calorimeter | Standards SN/T 3078.1. NY/T 3784. GB 51283 Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it c... |
 |
Anti-drilling and Lint Tester (Impact Method) | Scope of application: The impact method is used to determine the anti-drilling performance of fabrics, which is suitable for testing various down ... |
 |
Spray Aerosol Ignition Distance Test device | Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distance ... |
 |
Adiabatic Accelerated Calorimeter | Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempe... |
 |
Friction and wear meter | Standards ASTM G99-04 ASTM G77-16 ISO 9352:1995 GB/T 12444-2006 GB/T 12607-2007 GB/T 1865-2009 Application field Petrochemical: Used to ass... |
Same products
 |
Steaming Cylinder | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15.... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061... |
 |
Button Impact Tester丨Button Impact Test mechine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ... |
