Ozone Test Chamber STD-AC22
Feature
Whole chamber inside and gripers made up of stainless steel, anti-corrosion.
Outside of the chamber is baking finish (can choose SUS 304 stainless steel)
Whole machine equipped with a safety protection system, the end of the test automatically stops
Use low-noise, multi-wing centrifugal fan to supply air circulation to avoid any dead angle, which can evenly distribute temperature and humidity and ozone in the test area.
The test door and body are sealed with double layer ozone resistant high tensile silica gel to ensure the sealing of the test area
With a transparent window, chamber inner with a lamp, used to observe changes of samples.
Test space option
|
Capacity |
80L |
150L |
225L |
408L |
800L |
1000L |
|
Inside dimension (W×H×D, cm) |
40×50×40 |
50×60×50 |
50×75×60 |
60×85×80 |
100×100×800 |
100×100×100 |
|
Outside dimension (W×H×D, cm) |
95×136×94 |
100×146×104 |
100×161×117 |
110×171×137 |
150×186×137 |
150×186×157 |
Key Specification
|
Model |
STD-AC22 Ozone Test Chamber |
|
Ozone concentration |
0～1000PPHM |
|
Ozone concentration deviation |
≤10％ |
|
Chambertemperature |
0～80℃, can be set |
|
Chamber humidity |
20%~98%, can be set |
|
Specimen frame rotation velocity |
0～50mm/s |
|
Chamber gas-flow rate |
8-16mm/s |
|
Material of inner surface |
SUS304 mirror finished stainless steel |
|
Material of outside surface |
baking finish surface or SUS304 stainless steel, option |
Send product request
Other supplier products
 |
Bone Plates Four-point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million cycl... |
 |
Cell thickness gauge | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument... |
 |
NFPA 701-1 Flammability Tester | Introduction This tester mainly based on NFPA 701 R & D and the United States NFPA 701 that provides fabric and film flame propagation test me... |
 |
Electric hook core bending resistance testing machine | Product Introduction: The electric hook core anti-bending performance tester is used to test the anti-bending performance of the steel hook core. ... |
 |
SI80 Carbon Arc Aging Tester | Carbon arc aging tester: Material aging and fading performance test SI80 carbon arc aging tester, carbon arc aging machine through AC light car... |
Same products
 |
Steaming Cylinder | Seller: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Seller: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Seller: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | Seller: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Seller: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
