Drill Pipe
Drill Pipe
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardbanding: ARNCO 100XT, 200XT, 300XT, BOTN3000, ARMACORM
Length: R1: 5.49-6.71m R2: 8.23-9.14m R3: 11.58-13.72m
Upset: IU,EU,IEU
Usage: As the major part of drill stem, drill pipe connected with Kelly and drill collar, which is used to put torque to drill bit, and drill collar.
Mechanical Property
Group Grade Yield Strength Tensile Strength
Minimum Maximum Minimum
psi Mpa psi Mpa psi Mpa
1 E-75 75000 517 105000 724 100000 689
3 X-95 95000 655 125000 862 105000 724
G-105 105000 724 135000 931 115000 793
S-135 135000 931 165000 1138 145000 1000
Weld Zone Parameters
Steel Grade Min. Yield Strength Min. Tensile Strength Min. Elongation Min. AKV Impact
Mpa Mpa % J
E-75 517 689 13 20(Average)
15（Min Single）
X-95 609 712
G-105 655 724
S-135 724 793
Other supplier products
|
|
Junk Mills |
Junk Mills
The junk mill are designed to mill away metal objects, such as alloy-steel packers, squeeze tool, perforating guns, drill pipe, tool jo... |
|
|
Jar Intensifier |
Jar Intensifier Type YJQ
Jar Intensifier Type YJQ is designed on the principle of compressible fluid. It is used in conjunction with Fishing Jar T... |
|
|
Drill Pipe |
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardbanding: ARNCO 1... |
|
|
Junk Mills |
The junk mill are designed to mill away metal objects, such as alloy-steel packers, squeeze tool, perforating guns, drill pipe, tool joints, reamer... |
|
|
Taper tap |
Taper tap
Taper tap is an internal catch fishing tool designed to retrieve tubular members from the well bore. It is the most economical tool of it... |
All supplier products
Same products
