Edge Plating/Half-hole PCB
Half hole pcb
The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on the edge of the board is already a mature process in PCBSKY PCB manufacturing processing.
How to control the quality of the product after forming the Half-hole on the edge of the board. For example, the copper spurs of the hole wall and the residue have always been a problem in the processing.
This type of board has a row of half hole in the PCB, which is characterized by a relatively small aperture, mostly used on the carrier board, as a daughter board of the motherboard, through the half-hole and the motherboard and components The feet are welded together.
Therefore, if there are copper thorns remaining in these half-hole, the soldering of the plug-in manufacturers will result in inaccurate solder joints and weak soldering, which will cause a bridge short circuit between the two pins.
Half hole pcb has a minimum processing capacity of 0.4 mm for the sample and a minimum of 0.5 mm for the batch.
Edge Plating does not have a set definition per IPC. However, the industry generally accepts this as being copper plating that continues from the top and bottom surfaces and along one or more perimeter edges. The PCB edge plating processcan be used for a variety of purposes, including, but not limited to edge soldering, edge connections, and to increase current carrying capacity. Burrs Often pcb edge plating, especially on castellations, can result in burrs from the final machining process.
We apply a modified, proprietary process flow that results in the burrs being polished down to the edge of the feature. Copper Peeling Plating over a large substrate surface can lead to the plated copper peeling due to a lack of adhesion strength. We address this by first roughening the surface through a combination of chemical and other proprietary means. We then use direct metallization, which has a higher copper bond strength, to prepare the surface for plating.
Welcome to custom Edge Plating PCB / Half Hole PCB directly from PCB Factory at low cost.
Send product request
Other supplier products
High Frequency PCB | Custom high frequency pcb from professional pcb manufacturer china shenzhen with factory price in low cost. The high frequency of electronic equipm... | |
Electric Power | HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain... | |
High Tg PCB | What is High Tg PCB When the temperature rises to a certain area, the substrate will change from "glass state" to "rubber state", and the temperatu... | |
Double Sided Flexible PCB | After the double-sided PI board copper-clad board material is used in the double-sided circuit, a protective film is added on both sides to form a ... | |
Flexible PCB | Custom flex pcb chinafrom PCBSKY, pcb manufacturer in china shenzhen, a TRUE PCB MANUFACTURER. Because of the advantages (for example, cost, space,... |
Same products
2UUL SD11 Portable Electric Screwdriver Type-C Disassembly Tool | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description 2UUL SD11 Espresso Electric Screwdriver with 4pcs S2 Bits and smart torque c... | |
TSHY-800 Truck Mounted Wate Well Drilling Rig | Seller: Jinzhou City TongShun Drilling Machine Co.,Ltd | Portability Advantage: Adaptable to changing job sites, our water well drilling rigis the ideal c... | |
LEIYA-D8626 Brushless Motor Cordless Drill | Seller: ZHEJIANG JINGLI TOOLS CO., LTD. | Cordless electric drill is a portable power tool suitable for drilling, fastening, and dismantlin... | |
BLK-ED-111 ELECTRIC DRILL 16MM 1100W | Seller: Zhejiang Huaqi Information Technology Co., LTD | BLK-ED-111 ELECTRIC DRILL 16MM 1100W Disc Diameter 16mm Rated Input Power 1100W No-Load Speed 103... | |
SC-5803 Electric Chainsaw | Seller: Zhejiang GuYueHu Industry&Trade Co.,Ltd. | SC-5803 Electric Chainsaw Mini cordless battery operated hand chain saw. Portable handheld recha... |