Edge Plating/Half-hole PCB
Half hole pcb
The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on the edge of the board is already a mature process in PCBSKY PCB manufacturing processing.
How to control the quality of the product after forming the Half-hole on the edge of the board. For example, the copper spurs of the hole wall and the residue have always been a problem in the processing.
This type of board has a row of half hole in the PCB, which is characterized by a relatively small aperture, mostly used on the carrier board, as a daughter board of the motherboard, through the half-hole and the motherboard and components The feet are welded together.
Therefore, if there are copper thorns remaining in these half-hole, the soldering of the plug-in manufacturers will result in inaccurate solder joints and weak soldering, which will cause a bridge short circuit between the two pins.
Half hole pcb has a minimum processing capacity of 0.4 mm for the sample and a minimum of 0.5 mm for the batch.
Edge Plating does not have a set definition per IPC. However, the industry generally accepts this as being copper plating that continues from the top and bottom surfaces and along one or more perimeter edges. The PCB edge plating processcan be used for a variety of purposes, including, but not limited to edge soldering, edge connections, and to increase current carrying capacity. Burrs Often pcb edge plating, especially on castellations, can result in burrs from the final machining process.
We apply a modified, proprietary process flow that results in the burrs being polished down to the edge of the feature. Copper Peeling Plating over a large substrate surface can lead to the plated copper peeling due to a lack of adhesion strength. We address this by first roughening the surface through a combination of chemical and other proprietary means. We then use direct metallization, which has a higher copper bond strength, to prepare the surface for plating.
Welcome to custom Edge Plating PCB / Half Hole PCB directly from PCB Factory at low cost.
在线联系供应商
Other supplier products
| Gold Fingers PCB | Among the large-scale use of PCI and optical modules and cable sockets, the goldfingers PCBhas been divided into: long and short gold fingers, brok... | |
| Edge Plating/Half-hole PCB | Edge Plating/Half-hole PCB Hard Gold PCB HARD GOLD PCBVia in Pad VIA IN PAD PCB FABRICATION Conventional PCB Impedance Control PCB Gold Fingers PCB... | |
| Edge Plating/Half-hole PCB | Half hole pcb: The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on... | |
| Gold Fingers PCB | Among the large-scale use of PCI and optical modules and cable sockets, the gold fingers PCB has been divided into: long and short gold fingers, br... | |
| HDI PCB | HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain... |
Same products
| Nsrh-50 Tri-Lobe Roots Blower for Watertreatment Industry | 卖方: Greentech Industry (Jinan) Co., Ltd | Greentech International (Zhangqiu) Co., Ltd is the professional roots blower supplier. The NSRH t... | |
| Us Tech Roots Blower (M Series) | 卖方: Greentech Industry (Jinan) Co., Ltd | Greentech International (Zhangqiu) Co., Ltd is the professional roots blower supplier. Series M R... | |
| Us Tech Roots Blower (M Series) | 卖方: Greentech Industry (Jinan) Co., Ltd | Greentech International (Zhangqiu) Co., Ltd is the professional roots blower supplier. Series M R... | |
| Greentech Lt-065 380V Low-Noise Three-Lobe Roots Blower | 卖方: Greentech Industry (Jinan) Co., Ltd | Three lobes blowers are new series roots type blowers. By cnc machinewe made precise rotors to pr... | |
| Lz037b40 Maglev Turbo Blower/Energy Saving | 卖方: Greentech Industry (Jinan) Co., Ltd | constituent:The impeller of magnetic suspension centrifugal fan is driven by direct connection be... |















