Grinding Head G - Triangle Cone Shape (C)
KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels and shapes. To select the correct installation point, consideration must be given to the material, main application area and specific operational requirements. We will explain to you the appropriate materials for the different types (abrasives and binders) and the task at hand.
Features of Grinding Head G - Triangle Cone Shape (C)
Designed to meet individual grinding tool application needs, these products come in a broad range of grain types, grit sizes, hardness grades and shapes.
The electroplated mounted pointsare manufactured on modern production lines to high standards of dimensional accuracy and stability, consistent quality and close tolerances.
To select the correct mounted point, the material, main fields of application and specific operating requirements have to be taken into consideration.
Grinding Head G - Triangle Cone Shape (C) Applicable Industries
Applications
Surface: Edges and difficult reached angels, Deburring, Grinding, Welding removing, Finishing, Prepare for grouting, Roughening
Material Apply: Steel, Cast steel, Stainless steel, Non-ferrous metals, Cast iron, Plastics, Rubber, Wood
Matching Tool Drives:
Flexible shaft drive
Straight grinder
Safety Instructions of Grinding Head G - Triangle Cone Shape (C)
How To Grinding Head G - Triangle Cone Shape (C)
Instructions:
Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
If you want to know more kinds of abrasives china, please visit our website.
Send product request
Other supplier products
 |
Flap Wheel M14 4inch | KEYING 40mm flap wheelM14 is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this ... |
 |
Chrome Corundum Grinding Head G (PA) | chrome corundum grinding head g pa p1 grinding head g triangle cone shape c a32 1 a40 12 12 3 grinding head g triangle cone shape c a25 1 1 ch... |
 |
Aluminum Oxide Slashed Flap Wheel (AO) | Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable a... |
 |
Felt Flap Discs 4inch | Felt Flap Discs 4 inch is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the di... |
 |
Cartridge Rolls With Shank 25/32inch | Table of Cartridge Rolls with Shank 25/32inch Cartridge Rolls with Shank 25/32inch Specification: Diameter: 25/32 inch=20mm Raw Materials: A... |
Same products
 |
railway signal torch tricolor railway signal light | Seller: 834406 | 铁路奇格尔灯 可广泛应用于铁路、船舶等交通运输行业和一些特殊行业，如信号指示、安全警示和工作照明。 |
 |
Grinding Head X 1/4inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X 1-3/16inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head G - T Shape (T) | Seller: Keying Abrasives | KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc... |
