ALT Double Crank Integrated H Frame Press
The ALT series h type press machineis closed type double-point circulating thin oil lubrication. The ultra-long eight-sided guide rails can maintain good precision under a little eccentric load due to the two force points and large space. The crankshaft and the slider device are connected by a double-link transmission device; the double-link transmission device comprises two sets of synchronous connecting rods provided on the crankshaft. The synchronous connecting rod is connected with an adjusting screw sleeve which has fixed connection with the slider device.
KINGLANintroduced new technology from Japan and Germany, also upgraded our products and restructured our company in 2007. To enrich our products and help customer save more cost, apart from power press machine, JINAOLAN also invests many other production line surrounding products like feeding system, stamping die, transfer arms etc. which forms today's KINGLAN GROUP.
Email:
Export office:
Room 1309, No. 18, 1265 Lane, West Zhongshan Road, Shanghai, China
Tel: 0878/5410 8802
Headquarter:
Address: Huanglong 3rd Road, Huanglong Industrial Zone, Wuyi, Zhejiang,China
Tel: 8888
Send product request
Other supplier products
 |
Progressive Die | Progressive stamping die, also known as multi-position progressive die, jump die. According to the processing of the work piece, it is divided into... |
 |
H (Straightside) Frame Crank Type Mechanical Stamping Press | Closed type mechanical presses are mainly composed of frame, working table, beam, main drive, clutch, brake, micro adjustment device, slider, air p... |
 |
ALH Double Crank Separated H Frame Press | The ALH series press machine adopts a three-divided frame. The reinforcing rod is used to pre-tighten the top seat, the middle platform and the bas... |
 |
C (Gap) Frame Crank Type Mechanical Stamping Press | Crank press machine uses crank slide block mechanism as working mechanism, machine driving system passes the movement and energy of electromotor to... |
 |
Compound Die | (1)Blankingcompound die set: such as blanking and punching or cutting and punching etc. (2)Forming compound die: such as bending, extrusion etc. (3... |
