T4L8 Four Point Eight Link Mechanical Press
The T4L8 series mechanical eccentric press is a four point eight-linkage press. It has its own special structures as a large-scale tonnage press machine made by KINGLAN. In the transmission system of the press, the multi-link mechanism not only keeps the working stroke of the slider at a lower uniform speed, but also increases the speed of the slider in the approach stroke and the return stroke, thereby shortening the stroke cycle time of the slider and increasing the number of strokes of the press.
The starting point of the multi-link drive is to reduce the working stroke speed and speed up the idle speed to achieve the goal of improving productivity. The multi-link mechanical stamping press is divided into six links, eight links, ten links and other different types of presses. Among them, the eight-link is especially suitable for sheet metal stamping and deep drawing processes, and is used for mass production of large-scale thin-plate covers, such as the roof and doors of cars and trucks. It is especially suitable for deep drawing work.
The impact force of the mold in the stretching work area is small, and the working area at full load is long. However, due to the complicated structure of the transmission system, the required processing and assembly precision is high, so the manufacturing cycle is long, and the manufacturing cost is increased.
Well made products, innovation promote advance is KINGLAN's faith. KINGLAN face to the global, service the world. Choose KINGLAN equals to choose integrity and fortune!
Send product request
Other supplier products
 |
ALM Series Special Press for Battery Case | The battery shell deep drawing metal stamping press machineand the battery shell pres line conform to the high-speed development needs of new energ... |
 |
Stamping Die | As an inseparable part of metal stamping line, are much important in its service life and precision as it directly works on stamping parts and effe... |
 |
ALP Single Crank C Frame Press | The ALP series of open-type fixed table presses are general-purpose presses for sheet metal stamping. They are suitable for various cold stamping p... |
|
|
3 in 1 Decoiler Straightener and Feeder | 3 in 1 feeder is especially suitable for high strength steel, enhancing the processing precision. Machine has adopted electric straightening precis... |
 |
Progressive Die | Progressive stamping die, also known as multi-position progressive die, jump die. According to the processing of the work piece, it is divided into... |
Same products
 |
Cantilever-type glue MGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide Structural Insulated Panel | Seller: 824681 | Cantilever-typeglueMGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide Struc... |
 |
Cleanroom Handmade Steel Panel with Rockwool/ PU/EPS/Paper Honeycomb/Aluminum Honeycomb | Seller: 824681 | Cleanroom Handmade Steel Panel with Rockwool/ PU/EPS/Paper Honeycomb/Aluminum Honeycomb The gl... |
 |
Automatic Glue Spraying Machine for MGO Panels Fire-Proof Door Refrigerated Truck Body Panels | Seller: 824681 | Automatic Glue Spraying Machine for MGO Panels Fire-Proof Door Refrigerated Truck Body Panels ... |
 |
Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying | Seller: 824681 | Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying The ... |
 |
Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door | Seller: 824681 | Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Doo... |
