.

If you are in need of soil nailing to stabilize soil to prevent foundation failure, contact Sinorock

When you have soil failure, you will have foundation problems. The soil needs to be stabilized and secure in order for a foundation to be
stable. Some of the signs that you may be in need of foundation repair and are:

Sloping floors
Wall cracks
Floor cracks
Leaning chimney
Ceiling cracks
Doors and windows that stick
Many of these issues are due to foundation settlement due to loose soil conditions.

Sinorock installs ECP soil nails to stabilize the soil. These soil nails are installed in an evenly spaced close geometric pattern. When
installing a stabilization project, the soil nail installation and the excavation must be accomplished in incremental depths of 4
to 6 feet until the final depth is accomplished. Immediately following the incremental excavation of the soil and the soil nail
installations, the vertical face of the soil is covered with a steel reinforced coating.

Soil nails are passive structural elements and are not tensioned after installation. The soil nail gains pullout resistance from within the
sliding soil mass in front of the slip plane and the stable soil mass located behind the slip plane. The geometric system of soil nail
placements creates an internally reinforced soil mass that is stable. Figure 4 shows a sketch of a typical soil nail installation. Soil nails
are not tensioned after installation. They gain pullout resistance from within the sliding soil mass in front of the slip plane and the
stable soil mass located behind the slip plane.

Each soil nail has a great number of helical plates. These helical plates are evenly spaced along the entire length of the shaft (a tieback
anchor only has a few helical plates attached).

If you are in need of soil nailing to stabilize soil to prevent foundation failure, contact . Our contractors use only the best
products for foundation repair manufactured by ECP. Contact us today!








Send product request

To: soilnailing
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Soil nails are used to retain the unstable soil mass In many construction projects
Soil nails are used to retain the unstable soil mass In many construction projects is a construction technique that can be used as a remedial measure to treat unstable natural soil slopes or as a construction technique that allow...
Soil Nails are non-tensioned, in-situ reinforcement for the stability of excavations
Soil Nails are non-tensioned, in-situ reinforcement for the stability of excavations are non-tensioned, in-situ reinforcement for the stability of excavations and embankments in top-down construction. The Sinorock is an ideal choi...
Soil nail are used to attach structures and fixtures to masonry
Soil nail are used to attach structures and fixtures to masonry the face of a rock slope or cut. When securing the face of an excavation, rock bolts are used to support the unstable rock on the surface to the m...
Hollow Bar Soil Nails made by Sinorock for civil work
Hollow Bar Soil Nails made by Sinorock for civil work is a method of earth reinforcement. It can be used as foundation repair or construction of soil slopes. Advantages of soil nailing: 1.Installati...
Sinorock is special in soil nailing field
Sinorock is special in soil nailing field is an economical technique for stabilizing slopes and for constructing retaining walls from the top down. The process is based on using ground rei...
All supplier products

Same products

Pneumatic riveting machine
Pneumatic riveting machine Seller: Wuhan Rivet Machinery Co.,Ltd Specification: Max. riveting diameter Φ 3mm (solid steel rivet) Max.riveting pre...
Sunkaier Vertical Powder Dryer
Sunkaier Vertical Powder Dryer Seller: Jiangsu Sunkaier Industrial Technology Co., Ltd. Sunkaier Vertical Powder Dryer Vertical Cone Dryer Outline: Sunkaier vertical powder dr...
RSiC kiln shelf, recrystallized silicon carbide plate,ReSiC batt, slabs
RSiC kiln shelf, recrystallized silicon carbide plate,ReSiC batt, slabs Seller: Tangshan Sndou SiC Ceramics CO,Ltd kiln furniture of alumina zirconia ceramic, honeycomb ceramic, foam filter ceramic,ITO target, ML...
Custom Black ABS Resin CNC Machining Parts Plastic Prototypes
Custom Black ABS Resin CNC Machining Parts Plastic Prototypes Seller: GUANGDONG SHUNDE TEAMWORK MODEL TECHNOLOGY CO., LTD Batch production: Low volume production; Precision:High precision; Leading time: 3-5 days; C...
Rapid Prototyping Service
Rapid Prototyping Service Seller: Neway Precision Works Ltd Get your innovative ideas off the ground with our rapid prototyping service. We specialize in c...