.

If you are in need of soil nailing to stabilize soil to prevent foundation failure, contact Sinorock

When you have soil failure, you will have foundation problems. The soil needs to be stabilized and secure in order for a foundation to be
stable. Some of the signs that you may be in need of foundation repair and are:

Sloping floors
Wall cracks
Floor cracks
Leaning chimney
Ceiling cracks
Doors and windows that stick
Many of these issues are due to foundation settlement due to loose soil conditions.

Sinorock installs ECP soil nails to stabilize the soil. These soil nails are installed in an evenly spaced close geometric pattern. When
installing a stabilization project, the soil nail installation and the excavation must be accomplished in incremental depths of 4
to 6 feet until the final depth is accomplished. Immediately following the incremental excavation of the soil and the soil nail
installations, the vertical face of the soil is covered with a steel reinforced coating.

Soil nails are passive structural elements and are not tensioned after installation. The soil nail gains pullout resistance from within the
sliding soil mass in front of the slip plane and the stable soil mass located behind the slip plane. The geometric system of soil nail
placements creates an internally reinforced soil mass that is stable. Figure 4 shows a sketch of a typical soil nail installation. Soil nails
are not tensioned after installation. They gain pullout resistance from within the sliding soil mass in front of the slip plane and the
stable soil mass located behind the slip plane.

Each soil nail has a great number of helical plates. These helical plates are evenly spaced along the entire length of the shaft (a tieback
anchor only has a few helical plates attached).

If you are in need of soil nailing to stabilize soil to prevent foundation failure, contact . Our contractors use only the best
products for foundation repair manufactured by ECP. Contact us today!








在线联系供应商

至: soilnailing
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Soil nail are used to attach structures and fixtures to masonry
Soil nail are used to attach structures and fixtures to masonry the face of a rock slope or cut. When securing the face of an excavation, rock bolts are used to support the unstable rock on the surface to the m...
Sinorock has significant experience in soil nail
Sinorock has significant experience in soil nail Sinorock has significant experience and know-how in the supply of materials, components, finished goods, specially designed/engineered equipment, a...
A complete range of soil nail system from Sinorock
A complete range of soil nail system from Sinorock Sinorock now manufactures and supplies a complete range of and technical services to the related industries,such as the civil and tunnelling indus...
Sinorock High-Performance soil nails provide fast, easy, and secure fastening in almost all applications
Sinorock High-Performance soil nails provide fast, easy, and secure fastening in almost all applications Since its inception in 2011, Sinorock has continued to invent, manufacture, and sell only Sinorocksoil nails, the highest quality, best-performing ...
Sinorock soil nail System is today’s fast and efficient anchoring solution
Sinorock soil nail System is today’s fast and efficient anchoring solution The Sinorock is today’s solution for a fast and efficient anchoring system into virtually any type of soil. Sinorock has delivered millions ...
供应产品

Same products

武汉瑞威特机械有限公司
武汉瑞威特机械有限公司 卖方: 武汉瑞威特机械有限公司 Specification: Max. riveting diameter Φ 3mm (solid steel rivet) Max.riveting pre...
Sunkaier Vertical Powder Dryer
Sunkaier Vertical Powder Dryer 卖方: Jiangsu Sunkaier Industrial Technology Co., Ltd. Sunkaier Vertical Powder Dryer Vertical Cone Dryer Outline: Sunkaier vertical powder dr...
再结晶碳化硅板
再结晶碳化硅板 卖方: 唐山星斗碳化硅陶瓷有限公司 同等工况下厚度可以更薄,使用温度可达1700℃,高温高承载力和良好的尺寸稳定性及抗氧化、抗侵蚀能力,可用于陶瓷工业辊道窑、隧道窑和梭式窑中的窑具,轻量化理想窑具,更节能,主要应用于氧化铝&...
Custom Black ABS Resin CNC Machining Parts Plastic Prototypes
Custom Black ABS Resin CNC Machining Parts Plastic Prototypes 卖方: 广东顺德天沃模型技术有限公司 批量生产:小批量生产; 精度:高精度; 引导时间:3-5天; 可定制或可定制:可定制
Rapid Prototyping Service
Rapid Prototyping Service 卖方: 新航金属制品有限公司 通过我们的快速原型制作服务,让您的创新想法落地。 我们专注于定制金属和塑料零件制造,提供符合您具体规格的高质量原型。 加工:CNC加工、快速成型、3D打印 尺寸范围:最小1毫米,最大25...