Fingertip abrasion tester for coatings and paints
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standard
(1) IEC 68-2-70 – Mechanical durability of materials via fingertip/hand simulation
(2) GB/T 2423 series – Environmental testing of electrical and mechanical durability
(3) IEC 60068-2-70 – Fingertip/hand friction durability testing
(4) IEC 60068-2-72 – Surface wear and operational lifetime testing of materials
(5) ISO 11998 – Coating scrub and abrasion resistance methods
(6) ISO 2813 – Surface state and gloss evaluation methods
Technical Specifications
| Feature | Specification |
|---|---|
| Test Method | Simulates fingertip contact abrasion |
| Standard Compliance | IEC 68-2-70 |
| Test Load | Variable from 1 N to 100 N (set with dead weights) |
| Stroke (Scrub Distance) | Adjustable from 1 to 4 mm |
| Test Pistons | 10 mm and 20 mm diameter silicone test pistons |
| Cycle Counter | Pre-set digital counter |
| Operation Modes | Mechanical abrasion and chemo-mechanical abrasion |
| Dimensions (Approx.) | 100 × 80 × 60 cm |
| Power Supply | 110 V / 60 Hz |
| Construction | Precision-machined components for repeatable operation |
| Control Interface | Manual adjustment and digital cycle control |
Features
Realistic Human Contact Simulation: Accurately replicates fingertip abrasion under controlled load and stroke conditions.
Adjustable Parameters: Easily modify test load and stroke to suit different surface materials and textures.
Chemo-Mechanical Capability: Enables testing with liquids such as sweat or cleaning agents for enhanced realism.
Durable & Reliable Design: Built from precision aluminum and stainless steel components.
User-Friendly Controls: Simple setup with pre-set counter and intuitive adjustments.
Comprehensive Documentation: Supplied with operation manual, maintenance schedule, and replacement parts list.
Test Procedures
Measure and record specimen dimensions and thickness.
Secure the sample in the fixture and align properly.
Adjust fingertip mechanism height according to specimen thickness.
Install friction pad or chemical carrier.
Set load, friction stroke, and cycle count.
Start the device and monitor operation.
When the set cycle count is reached, the device automatically stops.
Remove the sample and evaluate surface appearance or performance changes.
Record and organize test results.
Maintenance Information
Keep fingertip heads and clamps clean to avoid contamination.
Inspect moving parts and mechanism for wear regularly.
Replace silicone fingertips or friction pads when worn.
Check and calibrate load weights and counter periodically.
Store in a clean, dry environment to prevent corrosion or damage.
Send product request
Other supplier products
 |
Gas Turbine Filter Test System，gas turbine filter pressure drop and efficiency tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test System for testing air intake filter systems for rotary machinery (ISO 29461). The tes... |
 |
ASTM E809 Compliance Retroreflectometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports compliance with the following standards: GB 20653-2020 &nda... |
 |
Automotive Interior Burning Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The Automotive Interior Burning Tester is designed according to ISO37... |
 |
Deval Abrasion Resistance Testing Equipment (for Deval abrasion testing machine) | Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar... |
 |
Micro Rapid Closed Cup Flash Point Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Reference Standards： SH/T 0768. SN/T 3077.1. DL/T 1354. ASTM D6450 SN/T 3077.2. ASTM D7094... |
Same products
 |
Industrial automotive sunshade end cap assembly line supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ... |
 |
High precision vehicle sunshade assembly machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man... |
 |
High precision control cable performance testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto... |
 |
Industrial automotive & motorcycle cable fatigue tester supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto... |
 |
Vehicle shock absorber jounce testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti... |
