Fingertip abrasion tester for coatings and paints

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standard

(1) IEC 68-2-70 – Mechanical durability of materials via fingertip/hand simulation

(2) GB/T 2423 series – Environmental testing of electrical and mechanical durability

(3) IEC 60068-2-70 – Fingertip/hand friction durability testing

(4) IEC 60068-2-72 – Surface wear and operational lifetime testing of materials

(5) ISO 11998 – Coating scrub and abrasion resistance methods

(6) ISO 2813 – Surface state and gloss evaluation methods

Technical Specifications

Feature	Specification
Test Method	Simulates fingertip contact abrasion
Standard Compliance	IEC 68-2-70
Test Load	Variable from 1 N to 100 N (set with dead weights)
Stroke (Scrub Distance)	Adjustable from 1 to 4 mm
Test Pistons	10 mm and 20 mm diameter silicone test pistons
Cycle Counter	Pre-set digital counter
Operation Modes	Mechanical abrasion and chemo-mechanical abrasion
Dimensions (Approx.)	100 × 80 × 60 cm
Power Supply	110 V / 60 Hz
Construction	Precision-machined components for repeatable operation
Control Interface	Manual adjustment and digital cycle control

Features

Realistic Human Contact Simulation: Accurately replicates fingertip abrasion under controlled load and stroke conditions.

Adjustable Parameters: Easily modify test load and stroke to suit different surface materials and textures.

Chemo-Mechanical Capability: Enables testing with liquids such as sweat or cleaning agents for enhanced realism.

Durable & Reliable Design: Built from precision aluminum and stainless steel components.

User-Friendly Controls: Simple setup with pre-set counter and intuitive adjustments.

Comprehensive Documentation: Supplied with operation manual, maintenance schedule, and replacement parts list.

Test Procedures

Measure and record specimen dimensions and thickness.

Secure the sample in the fixture and align properly.

Adjust fingertip mechanism height according to specimen thickness.

Install friction pad or chemical carrier.

Set load, friction stroke, and cycle count.

Start the device and monitor operation.

When the set cycle count is reached, the device automatically stops.

Remove the sample and evaluate surface appearance or performance changes.

Record and organize test results.

Maintenance Information

Keep fingertip heads and clamps clean to avoid contamination.

Inspect moving parts and mechanism for wear regularly.

Replace silicone fingertips or friction pads when worn.

Check and calibrate load weights and counter periodically.

Store in a clean, dry environment to prevent corrosion or damage.

Другие товары поставщика

	Automotive Interior Materials Tactile Perception Quality Testing Procedure System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Automotive seat surfaces: leather, fabric, synthetic leather, and composit...
	Film Heat Shrinkage Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The film heat shrinkage rate tester is mainly used to test the heat shrinkage...
	Keyboard Key Life Testing Machine	The Keyboard Key Life Testing Machine is designed to evaluate the durability and lifespan of keys and buttons across electronic devices. It is suit...
	Fully Automatic Falling Sand Abrasion Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.comv The Fully Automatic Falling Sand Abrasion Tester is designed to evaluate the wear resistan...
	Solids Spontaneously Igniting Tester	Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.3.1.4 Test N.2: Test Methods for Pyrophori...

Все товары поставщика

Похожие товары

	Industrial automotive sunshade end cap assembly line supplier	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ...
	High precision vehicle sunshade assembly machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man...
	High precision control cable performance testing machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto...
	Industrial automotive & motorcycle cable fatigue tester supplier	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto...
	Vehicle shock absorber jounce testing machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti...