Rail Saw Machine Power Tools for Railways Maintenance Rail Cutting Machine Nqg-K1270
Abrasive Rail Saw China Rail Cutter for Engineer Railway Maintenance Rail Cutting Machine Tools
NQG-K1270 lightweight abrasive rail saw is a railway maintenance tool.
It not only cuts rails with high speed and high quality, but also has low wear cutting discs.
It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement.
It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Model
NQG-K1270
Type
Abrasive Rail Saw
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
≥4500 r/min
Specification of cutting disc
φ355xφ25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail≤0.30mm Deviation of bidirectional cutting interfaces≤0. 35mm
Cutting time
≤110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
NQG-K1270 lightweight abrasive rail saw is a railway maintenance tool.
It not only cuts rails with high speed and high quality, but also has low wear cutting discs.
It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement.
It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Model
NQG-K1270
Type
Abrasive Rail Saw
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
≥4500 r/min
Specification of cutting disc
φ355xφ25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail≤0.30mm Deviation of bidirectional cutting interfaces≤0. 35mm
Cutting time
≤110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
Send product request
Other supplier products
 |
Mechanical track jack for railway maintenance | Track Jacks Track jack a device for raising railway track during ballasting or other track operations. Mechanical track jack is the simplest & ... |
 |
Railway Track Electric Drilling Machine with wooden bottom | LJ-LDG1901 Electric Rail Drilling Machine 36V Intelligent lithium battery rail drilling machine *Fully waterproof design, support rainy day... |
 |
Rail Wear Gauge | Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable des... |
 |
Portable Rail Tamper Battery Powered Vertical Tamping Machine | Model LJ-LZD2101 Type Rail Tamper Material Stainless Steel Dimensions (L x W x H) (mm) 1050* 345 *450mm Rated capacity of the power batte... |
 |
Hydraulic Railway Track Jack rail lifting and lining machine | Hydraulic Railway Track Jack It is new type equipment that is used on the railway line's maintenance and repairing. The most important f... |
Same products
 |
Frog and Switch Point Grinder | Seller: Wuhan linkage track equipment co.,ltd | 1. Easy and flexible operation 2. Work accurately in the narrow space between the rails 3. T... |
 |
Frog and Switch Point Grinder | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market f... |
 |
ND-5 Petr Rall Tamper | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | This portable high efhcient tamp-ing machine is suitable for break-ing and tamping the track ofd... |
 |
Lithium battery rail drilling machine | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | Lithium battery Rail Drilling Machine is suitable for drilling below 75kg/m type rail. Its rail ... |
 |
Gasoline engine rail profile grinder for rail head grinding | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | Gasoline engine rail profile grinder for rail head grinding |
