Frog and Switch Point Grinder
The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be used to grind frog, switch points, switch cores, top and side flashes of guard rails, and can also grind the rail flashes of crossovers and standard rails.
It can be tilted by 36° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions. So that the grinding device of the machine can work very accurately in the narrow space between the rails. According to customer needs, Honda GX160 or GX200 gasoline engine can be selected as power, and the installation dimensions of the two engines are the same.
Other supplier products
|
|
Rail Laser Versine Alignment Device |
Rail Laser Versine Alignment Device For railway measuring |
|
|
NQG-5III Rail Cutting Machine |
NQG-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m～75kg/m. The quality of cutting section meets the requirem... |
|
|
NLB-300 Rail Impact Wrench With Single Socket |
NLB-300 Rail Impact Wrench with One Socket NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, ho... |
|
|
" Rail Cant Measuring Device" |
Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear, it includes reference positioning frame and in... |
|
|
ND-5 Petr Rall Tamper |
This portable high efhcient tamp-ing machine is suitable for break-ing and tamping the track ofdifferent conditions, with charac-teristics of comp... |
All supplier products
Same products
