Catheter Power Injection Flow and Pressure Tester YY 0285.1
Main Uses
The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as flow and pressure of medical catheters (especially micro - catheters) during power injection. These parameters are crucial for evaluating the safety, reliability, and therapeutic effects of catheters. The tester can simulate clinical usage scenarios, conduct pressure resistance tests and flow measurements on catheters, ensuring that catheters will not rupture or leak under high - pressure injection, while maintaining the stability and accuracy of the flow.
Compliance Standards
YY 0285.1 - 2017 Disposable Sterile Intravascular Catheters, etc.
Technical Parameters
Test Pressure: Generally adjustable within 0 - 10MPa, with an error not exceeding ±2%. Some devices may have a smaller pressure range, such as 0 - 28MPa.
Test Flow: Generally 0 - 500ml, with an error not exceeding ±2%.
Water Bath Temperature: Usually 37°C, with an error not exceeding ±1°C.
Data Storage: It can store multiple groups of test data, such as 200 groups or 500 groups, etc.
Accuracy: High - precision sensors and data acquisition systems ensure the accuracy of test results.
在线联系供应商
Other supplier products
 |
Safety Footwear Compression Puncture Tester/ Compression & Penetration Resistance Tester | Test purpose Measure the compression resistance of the shoe head cover and the puncture resistance of the steel plate to prevent the operator from... |
 |
Shoe Flexing Tester / Shoe Flexing Test Machines - Reliable & Durable Solutions | Product Introduction Finished shoes bending testing machine Finished shoes bending testing machine Test shoes, casual shoes, work shoes and other ... |
 |
Filter Membrane Pore Analysis Tester | Product Introduction: The pore size and distribution within a filter membrane dictate its filtration efficiency, flow rate, and retention capabili... |
 |
Auto - ignition Point Tester for Liquids / ASTM E659 | Standards This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005) ... |
 |
Shoe bending Angle tester | Sole Bending Tester | Product Introduction: Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clampe... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
