.

Sole heat resistance testing machine丨Sole heat resistance tester

Main uses:

The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high temperature sand and stone heat temperature medium.

Reference standard:

EN ISO 20344. EN ISO 8772-1. GB/T 20991-2007. ANSI, JIS, CSA, GB12017-1989. LD50-1994 and other standards

Test principle:

The sandbox is heated to 150℃, the sand covers the contact point between the sample upper and the sole, and the change of the insole temperature over 30 minutes is recorded, accurate to 0.5℃。

Technical parameters:

Sand bath box size: (40±2)cm*(40±2)cm, height: 8cm

Sand height: ≥5cm

Sand size: (0.3 —— 1.0)mm

Sand volume: 5000±250cm

Test temperature: (150±5)℃ or (250±5)℃

Heating power: 2500±250W or more

Heat transfer medium: 5mm steel ball, total mass 4kg

Copper/copper-nickel thermocouple: Solder a copper disc 2±0.1mm thick and 15±1mm diameter


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Catheter Guidewire Friction Tester
Catheter Guidewire Friction Tester The Catheter Guidewire Friction Tester is designed to accurately measure the frictional forces between catheters and guidewires. It is a critical t...
Safety Helmet Roll-off Testing Equipment
Safety Helmet Roll-off Testing Equipment The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the...
Deval Abrasion Resistance Testing Equipment (for Deval abrasion testing machine)
Deval Abrasion Resistance Testing Equipment (for Deval abrasion testing machine) Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar...
 Dental Implants Fatigue Tester
Dental Implants Fatigue Tester Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure...
Leather edge oil fatigue testing machine
Leather edge oil fatigue testing machine The Leather Edge Oil Fatigue Testing Machine is designed to evaluate the fatigue resistance of edge coatings applied on leather, synthetic leather,...
Все товары поставщика

Похожие товары

G631A electric shoe stripping testing machine
G631A electric shoe stripping testing machine Продавец: Standard International Group (HK) Limited Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength...
G645 leather shoe hook stiffness testing machine
G645 leather shoe hook stiffness testing machine Продавец: Standard International Group (HK) Limited Product Introduction: Leather shoe hook stiffness tester is suitable for measuring the longitudi...
G651 national standard shoe bending tester
G651 national standard shoe bending tester Продавец: Standard International Group (HK) Limited Product Introduction: National standard shoe bending testing machine is specialized in testing f...
G664 fibreboard bending testing machine
G664 fibreboard bending testing machine Продавец: Standard International Group (HK) Limited Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and c...
G678W-L cold resistance testing machine for shoes
G678W-L cold resistance testing machine for shoes Продавец: Standard International Group (HK) Limited Product Introduction: Shoes cold resistance testing machine is used to test finished shoes, rubb...