Harness Taping Machine
Product features of automatic harness .
Using environment
Ambient environment: -10- +50ºC, relative humidity: 5-95% (no dew)
Environment: free from direct sunlight, no dust, corrosive gas, flammable gas, oil mist, steam, dripping, etc.
Altitude: It is less than 1000 m.
Installation steps
Adjustment and trial operation
After the equipment is installed, adjust the parts and then try to test run. Check to see if the parts are damaged or deformed before the test. If there is no apparent damage, click the drive mechanism button, and the tape will be running slowly. For more than one week, hold down the drive mechanism button for more than one second. The tape winding head is started slowly, and then it is running at a high speed. Release the button, the tape winding tip is changed to slow running, and the quick click on the transmission mechanism button stops when the position is estimated to the station.
Send product request
Other supplier products
| AL-937B Auto Label Rewinder | Features ofAL-937B Auto Label Rewinder Label winding machine Automatic speed sync and tension control, without any adjustments. Wind inside ... | |
| Fully Automatic Terminal Crimping Machine | The operation procedure of Full Automatic Crimping Machine 1. The operator must be trained to post the certificate for working;2. Pre-operation re... | |
| Enameled Wire Stripping Machine | Installation and use of enameled wire stripping machine. Choose appropriate peeling wheel and install them on the machine. Put two enameled wire i... | |
| Harness Taping Machine | Product features of automatic harness . Using environment Ambient environment: -10- +50ºC, relative humidity: 5-95% (no dew) Environment:... | |
| Automatic Wire Feeder | Safety precautions of thewire feedercontroller: 1. Ask professional technicians to install, connect and debug the device. In the conditions of ele... |















