Harness Taping Machine
Product features of automatic harness .
Using environment
Ambient environment: -10- +50ºC, relative humidity: 5-95% (no dew)
Environment: free from direct sunlight, no dust, corrosive gas, flammable gas, oil mist, steam, dripping, etc.
Altitude: It is less than 1000 m.
Installation steps
Adjustment and trial operation
After the equipment is installed, adjust the parts and then try to test run. Check to see if the parts are damaged or deformed before the test. If there is no apparent damage, click the drive mechanism button, and the tape will be running slowly. For more than one week, hold down the drive mechanism button for more than one second. The tape winding head is started slowly, and then it is running at a high speed. Release the button, the tape winding tip is changed to slow running, and the quick click on the transmission mechanism button stops when the position is estimated to the station.
在线联系供应商
Other supplier products
 |
RT-3000 PP Tape Dispenser | Specifications ofRT-3000 PP Tape Dispenser Available Width: 3 ~ 25mm Available Length: 9 ~ 61mm Power Supply: AC110V 60Hz / AC220V 50Hz Mea... |
 |
Label Cutting Machine | Description ofLabel Cutting Machine With Cold & Hot Cutting BJ-07N Model: BJ-07N with Memory Knife: Hot & Cold cutting CUT LENGTH (mm)... |
 |
AL-936 Label Rewinder | Features ofAL-936 Label Rewinder Automatic speed sync and tension control, without any adjustments. Wind inside or outside, Large roll capacity... |
 |
Round Bottle Labeling Machine | Common Problems of Semi—AutomaticRound Bottle Labeling Machine Ⅰ. The position of labeling is unstable 1. It is likely that the pressure ... |
 |
Label Cutting Machine | Label Cutting Machine Label Cutting Machine With Cold & Hot Cutting BJ-07N * Knife: Hot & Cold cutting* CUT LENGTH (mm): 1-99... |
