Ti Tablet

Ti Tablet

General Description of Ti Tablet

Titanium Tabletis used to adjust the content of Ti content in Aluminium Alloy, it is made by metal powder and the rest are pure aluminium or flux in proportion.

High efficiency is above 90%, the flux in the metal additives is favor for refining, purification, has effect of degassing, drossing and no content to make pollution.

Suitable for non-ferrous metal plates, strips, foils, profiles, rods, cables and alloys for the preparation of colored grades.

Density:3.8-4.1g/cm³

Content: metal powder+ rest

Metal powder：75%、80%、85%、90%、95%

Rest: A-Sodium free flux, B- flux+aluminium

Usage Instruction of Ti Tablet

Before refining flux application, the metal additives can be put into melting furnace or holding furnace directly. To achieve the high efficiency, should match up the right notice as follows:

The temperature of the aluminium liquid not lower than 740℃ the best application temperature is 750+5℃

It is sink down by itself, so keep the surface clean is very important. to avoid wrapped by the floating slag or the slage which floated on the surface. So it must be put into after drossing.

After skimming the dross, the tablet should be put directly in to the aluminium molten evenly with tablet please do not crush it, keep it stay for 20-30mintures, stir it and let it stay for 7-15 minutes. Sample analysis should be performed.

Dosage of Ti Tablet

Dosage=(Target-initial)*aluminium wt% /(90% * the alloy element content in the metal additives)

Target: element content of target

Initial: Original content of elements in the melt

Wt: The weights of aluminium melt

Specification of Ti Tablet

Product	Percentage of Element	Density	Appearance	Work Temperature
Ti Tablet	Ti: 75%,80%,85%,90%,95% Balance: pure aluminium or flux		Grey	750+5℃
					Fe Tablet	Fe: 75%,80% Balance: pure aluminium or flux	Grey Brown
Mn Tablet	Mn: 70%,80% Balance: pure aluminium or flux		Black Grey
					Cr Tablet	Cr: 75%,85% Balance: pure aluminium or flux	Grey
Cu Tablet	Cu: 75% - 80% - 85% - 90% Balance: pure aluminium or flux		Reddish Brown

Advantage of Ti Tablet

It can be put into the normal temperature aluminium metal

High density, easy to sink down

reaction quickly, no oxidation and burn loss

Package of Ti Tablet

500g/tablet.4 tablets wrapped by foil package load in 20kg carton.

Other supplier products

	Drossing Flux	Drossing Flux(SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing flux also name aluminum drossing fluxis specially developed for...
	Granulated Fused Refining Fluxes	General Introduction: SATA is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which can removes alkali metal(sodium, ...
	Reclaimed Fluxes	General Description of Reclaimed Fluxes Reclaimed fluxes is a strongly exothermic flux and used as covering and drossing flux, recovery of grindin...
	Recovery Flux	Application: mainly used for primary aluminium ,aluminium alloy and secondary aluminium. It can be used for remove the floating dross on the surfac...
	Recovery Flux	Recovery Flux (SATA-PF-320) General Description of Recovery Flux (SATA-PF-320) SATA recovery flux is a kind of flux used flux for recovering the en...

All supplier products

Same products

	pmk bmk oil powder qui en sont respectivemen	Seller: Chemicals are specially good	checkout/submission/96943/
	pmk bmk oil powder onių katalogas Įmonių	Seller: Chemicals are specially good	pmk bmk oil powder onių katalogas Įmonių
	mdma eutylone 3mmc 2fdck apvp onių katalogas Įmonių	Seller: Chemicals are specially good	mdma eutylone 3mmc 2fdck apvp onių katalogas Įmonių
	mdma eutylone 3mmc 2fdck apvp sėkmingai įdėtas!	Seller: Chemicals are specially good	mdma eutylone 3mmc 2fdck apvp sėkmingai įdėtas!
	Bromazolam 71368-80-4 sėkmingai įdėtas!	Seller: Chemicals are specially good	Bromazolam 71368-80-4 sėkmingai įdėtas!