Ti Tablet
Ti Tablet
General Description of Ti Tablet
Titanium Tabletis used to adjust the content of Ti content in Aluminium Alloy, it is made by metal powder and the rest are pure aluminium or flux in proportion.
High efficiency is above 90%, the flux in the metal additives is favor for refining, purification, has effect of degassing, drossing and no content to make pollution.
Suitable for non-ferrous metal plates, strips, foils, profiles, rods, cables and alloys for the preparation of colored grades.
Density:3.8-4.1g/cm³
Content: metal powder+ rest
Metal powder：75%、80%、85%、90%、95%
Rest: A-Sodium free flux, B- flux+aluminium
Usage Instruction of Ti Tablet
Before refining flux application, the metal additives can be put into melting furnace or holding furnace directly. To achieve the high efficiency, should match up the right notice as follows:
The temperature of the aluminium liquid not lower than 740℃ the best application temperature is 750+5℃
It is sink down by itself, so keep the surface clean is very important. to avoid wrapped by the floating slag or the slage which floated on the surface. So it must be put into after drossing.
After skimming the dross, the tablet should be put directly in to the aluminium molten evenly with tablet please do not crush it, keep it stay for 20-30mintures, stir it and let it stay for 7-15 minutes. Sample analysis should be performed.
Dosage of Ti Tablet
Dosage=(Target-initial)*aluminium wt% /(90% * the alloy element content in the metal additives)
Target: element content of target
Initial: Original content of elements in the melt
Wt: The weights of aluminium melt
Specification of Ti Tablet
|
Product |
Percentage of Element |
Density |
Appearance |
Work Temperature |
|
Ti Tablet |
Ti: 75%,80%,85%,90%,95% Balance: pure aluminium or flux |
Grey |
750+5℃ |
|
|
Fe Tablet |
Fe: 75%,80% Balance: pure aluminium or flux |
Grey Brown |
||
|
Mn Tablet |
Mn: 70%,80% Balance: pure aluminium or flux |
Black Grey |
||
|
Cr Tablet |
Cr: 75%,85% Balance: pure aluminium or flux |
Grey |
||
|
Cu Tablet |
Cu: 75% - 80% - 85% - 90% Balance: pure aluminium or flux |
Reddish Brown |
Advantage of Ti Tablet
It can be put into the normal temperature aluminium metal
High density, easy to sink down
reaction quickly, no oxidation and burn loss
Package of Ti Tablet
500g/tablet.4 tablets wrapped by foil package load in 20kg carton.
在线联系供应商
Other supplier products
 |
AlF3 | General Description: Molecular Formula: AlF3 CAS NO.:7784-18-1 Bulk Density: 1.51g/l Specific Gravity: 2.88g/cm3 Solubility: Soluble in water sligh... |
 |
Fluxes for Aluminum Alloy | Granular FluxGeneral Introduction: SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chlor... |
 |
Covering Flux-Csf1 | C sf1is fused flux which does not contain any form of sodium salt and does not cause the alloy to be brittle, suitable for all kinds of aluminum an... |
 |
Reclaimed Fluxes | General Description of Reclaimed Fluxes Reclaimed fluxes is a strongly exothermic flux and used as covering and drossing flux, recovery of grindin... |
 |
Potassium Aluminum Fluoride (PAF) | General Description of Potassium Aluminum Fluoride (PAF) It is also called Potassium Cryolite, Potassium Tetrafluoraluminate, Kalium Aluminium Flu... |
