Wireless Transmission Pipe Ultrasonic Flaw Detector
The ultrasonic pipe testing equipmentsystem is suitable for the automatic detection of various internal and external defects of steel pipes. The principle of ultrasonic flaw detection is that after the ultrasonic wave is coupled into the steel pipe through water, the incident propagation will cause ultrasonic reflection when there is a defect in the pipe. The ultrasonic instrument will alarm the ultrasonic reflected signal after realizing the signal to realize the automatic detection of the defect; Transmission ultrasonic pipe testing equipmentis currently the advanced detection equipment in China.
Wireless Transmission Pipe Ultrasonic Flaw Detector Introduction
Rotating probe configuration
A total of 3 probe adjustment frames are placed on section 1 at 120°apart. Each of the adjustment frames is equipped with a 2-channel combined ultrasonic line focusing longitudinal probe to detect longitudinal defects of the steel tube in a clockwise direction.
Detection of defects: Vertical and vertical defects in the steel pipe are detected in a clockwise direction.
Center frequency: 5.0MHz±10%
Coupling method: water immersion method
Quantity: 3 sets of probes, each consisting of 2 wafers. These 3 sets of probes are evenly distributed in the circumferential direction of the workpiece, spaced 120° apart, on the same section. A total of 6 channels of water immersion probes.
A total 3 probe adjustment frames are placed on section2, separated by120°, and a 2-channel combined ultrasonic line focusing longitudinal probe is arranged on each adjustment frame to detect longitudinal defects of the steel pipe counterclockwise.
Detection of defects: counter-clockwise detection of longitudinal defects inside and outside the steel pipe.
the center frequency: 5.0MHz ± 10%
coupling method: water immersion method
Quantity: 3 sets of probes, each consisting of 2 wafers. These 2 sets of probes are evenly distributed in the circumferential direction of the workpiece, spaced 120° apart, on the same section. A total of 6 channels of water immersion probes.
Defect detection standard
Inspection of Longitudinal and Transverse Defects in Ultrasound Steel Pipe: GB/T5777-2008 L2(C5) Standard
Wireless Transmission Pipe Ultrasonic Flaw Detector Performance
|
Number of channels |
12channels |
|
Flaw detection speed |
40m/min |
|
Total gain |
100dB，step 0.5dB |
|
Working mode |
Single probe transmitting, receiving or dual probe transmitting and receiving separately |
|
Sensitivity margin |
≥50dB |
|
resolution |
≥26dB |
|
Dynamic range |
≥30dB |
|
Scanning range |
0～5000mm |
|
Frequency range |
|
|
Sampling range |
250MHz |
|
Repeat frequency |
Signal channel100Hz～4KHzadjustable |
|
Vertical linearity |
≤2% |
|
Horizontal linearity |
≤1% |
|
Detection method |
Full-wave, positive half-wave , negative half-wave |
|
Gate setting |
3 gates per channel, A and B are defect gates, and c is an Interface tracking gate |
|
Alarm indication |
Alarm color display and audible alarm for each channel A, B, C |
|
Delay alarm |
Two ways, Delay time0.1～10S, step 0.1Swaveform storage, the unlimited number for waveform playback, printing and report generation |
BKNis a professionalultrasonic flaw detector manufacturersand ultrasonic testing equipment suppliers. We provide Magnetic Flux Leakage Testing, ndt testing machine, eddy current testing, ultrasonic pipe inspection equipment, ut pipe testing, ultrasonic flaw detector machine, ultrasonic flaw detector probeand so on. Want to know more? Please contact us.
Send product request
Other supplier products
 |
QTXET-01 Ball Studs Eddy Current Sorting Machine | There are two main types of ball studs: one is a combination of a spherical pin and an integral ball seat, and the other is a combination of a hemi... |
 |
Bolt Vortex Sorter BKNFX-11 | Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external ... |
 |
Drill Pipe Magnetic Flux Leakage Detector MFL-308 | Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Instit... |
 |
Portable Magnetic Flux Leakage Testing Equipment | Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects... |
 |
EDM Notch | Nanjing BKN Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is an eddy... |
Same products
 |
Beeswax used for candle processing | Seller: Syntop chemical Co.,Ltd. | The advantages of beeswax candles are quite notable: Natural ingredients: Beeswax is a natural s... |
 |
Greentech GR220 Electric Star Feeder | Rotary Airlock Valve Seals for Pneumatic Conveying Systems 6 Months Warranty 310kg | Seller: Greentech International (Zhangqiu) Co., Ltd | Customized Support: Tailored solutions for industrial machinery needs. High-Quality Electric P... |
 |
Bottle Cap Mold | Seller: Taizhou Qihong Mold Co., Ltd. | Bottle Cap Mold is designed for precise and consistent plastic cap production, supporting differe... |
 |
High quality beeswax used in craft production | Seller: Syntop chemical Co.,Ltd. | Beeswax has a wide range of uses in handicrafts, appearing in everything from traditional candles... |
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
