56G QSFP AOC
TS CommunicationTSQS-8556G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ for 56 Gigabit Ethernet, compliant with the QSFP MSA, InfiniBand FDR/QDR/DDR/SDR, 2G/4G/8G/10G/16G Fiber Channel, PCIe and SAS. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four full-duplex lanes in each direction with 56 Gbps bandwidth. The length is up to 100 meters using OM3 MMF.
Features of 56G QSFP+ AOC
Four-channel full-duplex active optical cable with QSFP+ plugs
Electrical interface compliant to SFF-8436
Support 56GE data rate
Hot Pluggable
Built-in digital diagnostic functions
Operating case temperature 0℃ to 70℃
RoHS compliant
Applications of 56G QSFP+ AOC
Data Centers
Infiniband transmission, High-performance computing (HPC) application
Specifications of 56G QSFP+ AOC
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Storage Temperature |
TS |
-20 |
85 |
℃ |
|
Relative Humidity |
RH |
0 |
85 |
% |
|
Case Operating Temperature |
TCase |
0 |
70 |
℃ |
|
Supply Voltage |
VCC |
-0.5 |
V |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Case Operating Temperature |
TCase |
0 |
70 |
℃ |
|
|
Supply Voltage |
VCC |
V |
|||
|
Differential Data Input Voltage Per Lane |
Vdin |
200 |
1200 |
mVp-p |
|
|
Data Rate Per Lane |
DR |
Gbit/s |
Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Bit Error Ratio |
BER |
10-12 |
|||
|
Differential Data Output Voltage Per Lane |
Vdout |
320 |
450 |
mVp-p |
|
|
Differential Termination Resistance |
Zout |
80 |
100 |
120 |
Ohm |
|
Module Total Power |
P |
W |
|||
|
Transmit Turn-On Time |
2000 |
ms |
Pin Definitionsof56G QSFP+ AOC
|
Pin |
Symbol |
Name/Description |
|
1 |
GND |
Ground |
|
2 |
Tx2n |
Transmitter Inverted Data Input |
|
3 |
Tx2p |
Transmitter Non-Inverted Data Input |
|
4 |
GND |
Ground |
|
5 |
Tx4n |
Transmitter Inverted Data Input |
|
6 |
Tx4p |
Transmitter Non-Inverted Data Input |
|
7 |
GND |
Ground |
|
8 |
ModSelL |
Module Select |
|
9 |
ResetL |
Module Reset |
|
10 |
Vcc Rx |
+3.3 V Power supply receiver |
|
11 |
SCL |
2-wire serial interface clock |
|
12 |
SDA |
2-wire serial interface data |
|
13 |
GND |
Ground |
|
14 |
Rx3p |
Receiver Non-Inverted Data Output |
|
15 |
Rx3n |
Receiver Inverted Data Output |
|
16 |
GND |
Ground |
|
17 |
Rx1p |
Receiver Non-Inverted Data Output |
|
18 |
Rx1n |
Receiver Inverted Data Output |
|
19 |
GND |
Ground |
|
20 |
GND |
Ground |
|
21 |
Rx2n |
Receiver Inverted Data Output |
|
22 |
Rx2p |
Receiver Non-Inverted Data Output |
|
23 |
GND |
Ground |
|
24 |
Rx4n |
Receiver Inverted Data Output |
|
25 |
Rx4p |
Receiver Non-Inverted Data Output |
|
26 |
GND |
Ground |
|
27 |
ModPrsL |
Module Present |
|
28 |
IntL |
Interrupt |
|
29 |
Vcc Tx |
+3.3 V Power supply transmitter |
|
30 |
Vcc1 |
+3.3 V Power Supply |
|
31 |
LPMode |
Low Power Mode |
|
32 |
GND |
Ground |
|
33 |
Tx3p |
Transmitter Non-Inverted Data Input |
|
34 |
Tx3n |
Transmitter Inverted Data Input |
|
35 |
GND |
Ground |
|
36 |
Tx1p |
Transmitter Non-Inverted Data Input |
|
37 |
Tx1n |
Transmitter Inverted Data Input |
|
38 |
GND |
Ground |
Send product request
Other supplier products
 |
100G QSFP28 AOC | T&S FWDMDevice is a product that can customize the transmission band or the reflection band within the wavelength range of 1260-1680nm; it can ... |
 |
MTP/MPO LOOPBACK | T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed b... |
 |
PLC SPLITTER | Planar Lightwave circuit (PLC) splitter is a sort of optical power management device produced using silica optical waveguide technology and offers ... |
 |
FBG Temperature Sensor | SEN-T004 Sensor measures the temperature by utilizing the inherent feature of heat-sensitivity of FBG. All the capsulation is specially designed to... |
 |
SFP28 25G LR | T&S TSSP-3125G-LR is a single-Channel, Pluggable, Fiber-Optical SFP28 for 25 Gigabit Ethernet Applications. It is a high-performance module for... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
