SDS Steel Fiber
Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturerspecializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production scale of up to 10,000 tons of steel fiber for concrete. It mainly produces glued steel fiber, copper-coated micro steel fiber and loose steel fibers.
The steel fibre typesfor concrete reinforcement is a new kind of metal material, in order to enhance concrete and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control and other functions. Widely used in industrial factory floor, highway, high-speed rail, bridge, airport, tunnel, water conservancy, electric power, municipal engineering, etc. The company has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc.
The Benefits of hooked end steel fiber
For the same mixing and construction, there is no need to add equipment or increase the construction cost.
Under the same strength requirement, it can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.
Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.
Convenient construction, saving labor, greatly shortening the construction period and saving the total project cost.
The Working Principle of hooked end steel fibres
Fibers reinforce in three dimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter) and anchorage. The distributed fibers restrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. The sooner the crack is intercepted and its growth is inhibited, the less chance the crack will occur.
Send product request
Other supplier products
 |
Steel Fiber For Bridge | Steel Fiber For Bridge Steel fiber for bridge deck pavement As bridge deck pavement material and pavement repair material, steel fiber concrete... |
 |
SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber | The glued steel fibers are water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, air... |
 |
SDS Glued Hooked End Steel Fiber | Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiberin bulked could make sure it has good dispersibility in ... |
 |
SDS Loose Hooked End Steel Fiber | Hooked end steel fibress are made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal toleran... |
 |
Steel Fiber For Tunnel | Steel Fiber For Tunnel Steel fiber reinforced concrete (SFRC) has good crack resistance, low shrinkage, good waterproof and anti-seepage propert... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
