SDS Steel Fiber
Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturerspecializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production scale of up to 10,000 tons of steel fiber for concrete. It mainly produces glued steel fiber, copper-coated micro steel fiber and loose steel fibers.
The steel fibre typesfor concrete reinforcement is a new kind of metal material, in order to enhance concrete and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control and other functions. Widely used in industrial factory floor, highway, high-speed rail, bridge, airport, tunnel, water conservancy, electric power, municipal engineering, etc. The company has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc.
The Benefits of hooked end steel fiber
For the same mixing and construction, there is no need to add equipment or increase the construction cost.
Under the same strength requirement, it can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.
Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.
Convenient construction, saving labor, greatly shortening the construction period and saving the total project cost.
The Working Principle of hooked end steel fibres
Fibers reinforce in three dimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter) and anchorage. The distributed fibers restrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. The sooner the crack is intercepted and its growth is inhibited, the less chance the crack will occur.
在线联系供应商
Other supplier products
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, sh... |
 |
SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber | The glued steel fiberare water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, airpo... |
 |
SDS Micro Copper Coated Steel Fiber | Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturerspecializing in steel fiber production in China a... |
 |
SDS Loose Hooked End Steel Fiber | Hooked end steel fiberwas made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance.... |
 |
SDS-05535 0.55mm Diameter 35mm Length Glued Steel Fiber | This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times c... |
Same products
 |
Microcrystalline wax 80A used for thickener | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax is a commonly used thickener, which mainly utilizes its characteristics of h... |
 |
Microcrystalline wax used for rubber additive | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily serving as a grease t... |
 |
OPE WAX used for improving the wear resistance of the coating | 卖方: Syntop chemical Co.,Ltd. | OPE wax has a wide range of applications, with its core value lying in its excellent internal and... |
 |
Bamboo Thermos Flask | 卖方: 865087 | Yongkang Aijun Industry & Trade Co., Ltd. offers Bamboo Thermos Flask products combining a na... |
 |
150TPD Wheat Flour Mill Plant | 卖方: solve these problems | 150TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 150TONS WHEAT PER 24HOURS Struct... |
