WIRE DRAWING DIE BLANK

• 

According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working area, sizing area and exit area"（See figure 1）. The inner diameter profile of the drawing die is very important. It determines the tension required to compress the wire rod and affects the residual stress in the wire after drawing. The functions of each area of the die core are as follows: the entrance area is convenient for material threading and preventing the steel wire from scratching the drawing die from the entrance direction; the lubrication area is convenient for the steel wire to be brought into the lubricant; the working area is the main part of the die hole, and the deformation process of the steel wire is carried out here, that is, the original section is reduced to the required section size. When drawing metal with conical surface, the space occupied by the volume of metal in the working area is a circular table, which is called deformation area. The cone half angle α (also known as die half angle) in the working area is mainly used to determine the drawing force; the sizing area is used to obtain the exact size of the drawn steel wire; the outlet area is used to prevent the steel wire from surface scratching due to the instability of the steel wire exit.

Betalent carbide manufactures carbide drawing diescore blank as per drawing, tolerance of diameter and hole can be controlled to be very small, hole tolerance can be controlled to be +/-o.1mm, adding a polishing machining process you can get final ready grinding hole no need wire cutting or other allowance removing machining process, which can save lots of labor and machining cost. Betalent has moulds for some size of wire drawing blank, more and more size molds are in making, please contact sales person for the ready moulds list if you want to check to see if the wire drawing die size you need can be available from ready moulds or not.

Xiamen Betalent Carbide Co., Ltd isa professional carbide products inc, we provide die angle in wire drawing, pcd wire drawing dies, diamond wire drawing dies, tungsten carbide wire drawing dies, carbide tool, etc.Want to know wire drawing dies priceor more? Please contact us.

Other supplier products

	TWIST DRILL BIT	Betalent twist drill bits are manufactured by Walter 5-axil grinding machine base on submicron grain size tungsten carbide rods, which enable the e...
	2 FLUTE, 0.8 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER	2 FLUTE, 0.8 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutting dia. Grade BT55 Shank dia....
	CARBIDE ROD	Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91....
	WIRE DRAWING DIE BLANK	According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working...
	CARBIDE STRIPS	Tungsten carbide stripsare referring the rectangular tungsten carbide rod, also known as tungsten carbide flats.It is produced by the same way as c...

Same products

	Co2 Fractional Laser divides	Seller: Beijing Mega Beauty Technology Co.,Ltd	Co2 Fractional Laser divides the laser beam into multiple, smaller beams spaced regularly to...
	Fractional CO2 Laser Skin Resurface	Seller: Beijing Mega Beauty Technology Co.,Ltd	Fractional CO2 Laser Skin Resurface Fractional CO2 Laser Skin Resurface Model: MBT-Co2 is ...
	Medical Aesthetic Devices	Seller: Beijing Mega Beauty Technology Co.,Ltd	Medical Aesthetic Devices Medical Aesthetic Devices is a leading Medical Aesthetic Device...
	HIFU SMAS Lifting	Seller: Beijing Mega Beauty Technology Co.,Ltd	HIFU SMAS Lifting , the newest non-surgical method of skin lifting for the face and body. On...
	Body Slimming Machine	Seller: Beijing Mega Beauty Technology Co.,Ltd	Body Slimming Machine MBT-Laser Body Slimming Machine Use cutting-edge technology to sl...